WCA March 2017

20 / 84

18 Wire & Cable ASIA – March/April 2017
Industrynews
DELISI Srl specialises in manufacturing automatic
straightening and cutting machines for smooth and ribbed
wires from 1 to 20mm in diameter.
Its machines are characterised by rapid change of
diameter, rapid change of the lengths and fast set up:
about one minute, to change the diameter to work. The
spinner is supplied with a straightening unit of
pre-regulated jaws for each diameter of wire to work: it is
enough to install the suitable straightening unit according
to the wire to handle, and the spinner will be ready to
work without waste of time and material.
The straightening jaws can be in polyamide for aluminium
and copper wires; in bronze for aluminium, drawn steel
stainless steel wires; in cast iron for drawn wires; in cast
iron with carbide inserts for drawn, laminated and ribbed
wires; or in integral carbide for drawn, laminated and
ribbed wires. They can also be in Teflon or wood to fit
them to the customer requirements.
The wire in the spinner is straightened through a series of
bends that do not damage it while it is moving. With the
flying cut, the shears run during the cut. After finishing the
cut, they quickly return back to the starting point, without
the wire stopping.
For a high number of short cuts, as for example when
working electrodes, Delisi can supply the machine with a
continuous cutting disc, so the cutting speed is higher
and the maximum production of 400 pieces per minute
can easily be reached.
On request, the machines can be supplied with electronic
programmer and different types of pay-offs and rod
collection beds and other special devices.
Delisi Srl – Italy
Website:
Specialists in
straightening and
cutting machines
❍ Delisi – specialist manufacturer of automatic straightening and
cutting machines for smooth and ribbed wires