Caterpillar Performance Handbook, January 2017, SEBD0351-47

89 / 2440

2-42 Edition 47
Backhoe Loaders Performance Data
● 430F2/430F2 IT
DIMENSIONSWITH FORKS/
MATERIAL-HANDLING ARM Cat 430F2 IT Operating Specifications with Forks
ForkTine Length 1070 mm (3'6") 1220 mm (4'0") 1370 mm (4'6")
Operating load (SAE J1197) 2448 kg 5397 lb 2368 kg 5220 lb 2292 kg 5054 lb
SAE load center 535 mm 1'9" 610 mm 2'0" 685 mm 2'3"
Operating load (CEN 474-4) 2772 kg 6111 lb 2749 kg 6062 lb 2726 kg 6009 lb
CEN load center 500 mm 1'8" 500 mm 1'8" 500 mm 1'8"
Overall length (A) (forks on ground) 7822 mm 25'8" 7973 mm 26'2" 8121 mm 26'8"
5377 mm
17'8"
6183 mm
20'3"
4570 mm
15'0"
1103 mm
3'7"
†3184 mm
10'5"
† 4182 mm
13'9"
†5182 mm
17'0"
†2755 mm
9'0"
†2164 mm
7'1"
2532 mm
8'4"
3530 mm
11'7"
4530 mm
14'10"
†592 mm
1'11"
†1577 mm
5'2"
DIMENSIONSWITH FORKS/
MATERIAL-HANDLING ARM Cat 430F IT Operating Specifications with Material-Handling Arm
Material-Handling Arm Position Retracted Mid-Position Extended
Operating load (SAE J1197 and CEN 474-4) 1058 kg 2333 lb 674 kg 1487 lb 495 kg 1092 lb
Overall length, maximum 9008 mm 29'7" 10 005 mm 32'10" 11 005 mm 36'1"
3410 mm
11'2"
20 mm
1"
(A)
†696 mm
2'3"
1588 mm
5'3"
†938 mm
3'1"
†1475 mm
4'10"
Operating load is hydraulic and tip limited.
†Measured from nose of machine.
Operating load is hydraulic and tip limited.
Dimensions and performance specifications
shown are for 4WD machines equipped with
12.5/80-18 I-3 front tires, 19.5L-24 R-4 ATU
rear tires, ROPS canopy, standard stick with
610 mm (24 in) standard duty bucket, and
1.00 m3 (1.31 yd3) loader bucket and standard
equipment unless otherwise specified.
†Measured from nose of machine.