162 / 488
156
156
10,500 LITRE SAFE FILL CAPACITY SELF BUNDED DIESEL TANK
>
>
The ET Series is a premium fuel storage solution
designed for harsh operating environments with
minimal site preparation.
>
>
Pressed corners and a reinforced top means a robust
tank for your fuel storage needs.
>
>
All steel construction -designed for the most
demanding applications in mining, heavy contracting,
service station, rental and agriculture.
>
>
Self bunded (double wall) internal tank and external
bund.
>
>
CSC Certified as 10Ft High cube ISO shipping
container with corner locking castings. Suitable for
transport via ship, rail and road.
>
>
Constructed to Australian Standards AS1692-2006,
AS1940-2004 and AS165
>
>
Calibrated dipstick for internal tank contents
measurement.
>
>
Interstitial dip stick for bund monitoring.
>
>
Bunded pump bay with dual heavy duty lockable
doors.
>
>
Galvanised ladder for access to platform above
bunded pump bay. Can be located on either side of
the tank (Ex-factory) to suit the installation. Ladder
includes galvanised bridging stair tread for access to
platform
>
>
Suitable for static/onground storage only of diesel
fuel and lubricant oils (non-flammable).
>
>
Suitable for outdoors storage only.
>
>
Dimensions: 2991mm Long x 2438mm
Wide x 2896mm High.
31,000L CONTAINER TANKS - ET RANGE
>
>
Incoming pipe work, male camlock, cap, 80mm Fire safe ball valve, wafer check valve,
Mechanical overfill prevention valve and electronic audible / visual alarm.
Safe Fill level 95% of gross capacity.
>
>
Discharge pipe work with anti-syphon valve. Allowance for submersible pump installation in
the manhole covers. All pipe work colour coded UN specification.
>
>
Bunded pump bay on the front of the tank c/w drain point, valves, optional hose mast
provision to each side. Internal floor joist for pump mounting and optional brackets for
components mounting.
>
>
Galvanised Access 600mm and Hatch covers complete with gaskets.
Stainless steel plugs. Tank design with two access covers.
>
>
Tanks include corner container lock castings for
ease of transport.
>
>
Permanent Galvanised ladder installed that
can be located on either side of the tank (Ex-
factory) to suit the installation. Ladder includes
galvanised bridging stair tread. Galvanised kick
plate and middle rail provided.
>
>
Morrison emergency vent in interstitial vent.
>
>
Calibrated Dip stick and cover supplied.
>
>
Updraft vent riser galvanised and fittings
supplied. Suction port 50mm c/w drop pipe
fitted as standard.
>
>
All statutory signage supplied.
>
>
Factory paint coating Hempel Hempthane with
Hempel Zinc as primer coating. Marine Grade
Painted to 3 part 120um cover. Sand Blasted to
SA2.5.
>
>
Dimensions: 6058mmL x 2438mmL x
2896mmH.