296 / 488
46
46
COMPAC CLAMPING & ROTATION ATTACHMENTS
Used for gripping loads
by the diameter or
circumference such as
reels, drums, barrels etc
and rotating to any
position through 360° in
sideways rotation.
Powered Clamping
Powered Clamping can be
supplied as an option on any
Clamp Attachments providing
effortless operation and
controlled clamping pressure.
Mechanical Rotation
The Clamp Spindle can be
supplied with a hand operated
mechanical gearbox to provide
effortless and controlled rotation.
This option is particularly useful
for bulky or heavy load.
COMPAC FORWARD TIPPING
ATTACHMENTS
The Geared Manual Forward Tipping option design provides the
operator with full control when tipping the barrel forwards. The
worm and wheel gearbox will hold the load at any given angle.
The rotation takes place by rotating the front handwheel. The
high gear ratio means that the effort required is significantly
reduced making this a great option for any operator.
The barrel pads are lined with rubber to ensure a secure grip.
Depending on the item being lifted greater clamping torque can
to provided to eliminate telescoping or slipping as the lifting
takes place.
COMPAC ANTI-TELESCOPING CLAMP
ATTACHMENTS
Some types of reels can telescope easily when handled using
the core only. The double clamping vertical spindle allow the
operator to lift and rotate reels of material using the core with
the vertical spindle, but also clamp the diameter of the reel with
two adjustable clamps. The clamps are easy to use and prevent
any telescoping of the material on the reel. This mechanism
uses torque units to ensure the reel’s material is not damaged
whilst being handled, but also to ensure sufficient grip is
applied.