91 / 488
85
85
DUMPMASTER BIN TIPPERS
Dumpmaster Bin Tippers empty bins from floor level effortlessly with the
simple push of a button - the safe alternative with no bending or lifting
required by the operator. The Standard Dumpmaster can empty bins up to
250kg (Single phase unit 200kg). The Dumpmaster is safe to use with the
bins raised vertically, then gently rolled forward when they reach tipping
height. The compact design of the Dumpmaster uses minimum space and is
much safer than tippers that rotate the bin around a fixed point. The bin and
cradle comes down by gravity.
>
>
The tipping cradle is suitable for use with 80,120,140 & 240L wheelie bins
as standard
>
>
Cradles are available to handle drums and a wide range of baskets, trays
and crates
>
>
A range of doors, additional guarding and different styles of guarding is
available to suit almost any application or requirement
>
>
Dumpmaster’s are available either completely constructed from stainless steel
or with selected components made from stainless steel
>
>
Controls can be fitted to either side or at the rear of the Dumpmaster
>
>
Optional Bin Hooks and tipping chutes are available
>
>
Any tipping height to 6 metres
>
>
Compressed - Air operation available to facilitate use in hazardous
environments
>
>
Dumpmaster’s can be fitted with a Solar Panel allowing bins to be emptied
using solar power alone.
>
>
Any tipping height up to 6000mm is available on request
>
>
Available with category 3 safety systems
STANDARD SPECIFICATIONS
Frame width
920mm
Overall width
950mm
Length (full cage-guarding)
1150mm
Height
Tipping Height + 1065mm
Capacity
250Kg
Castors
100mm Ø
Choose your power source
Choose either battery, air, single-phase,
or 3-phase power source.
Battery powered models have a built-in
automatic charger and can empty up to
12 tonnes of product on a single
charge (depending on tip height, and
battery condition).
Standard DUMPMASTERS may be
used outdoors. Machines can be
simply upgraded to suit more severe
environmental conditions.
Galvanised or stainless steel
frame options
DUMPMASTERS usually have a fully
hot-dip galvanised steel frame with
zinc-plated guarding.
They can also be supplied partially or
entirely from stainless steel for food
and pharmaceutical applications.
DUMPMASTERS are virtually
maintenance-free.
Easy to move
DUMPMASTERS have four castors
for total manoeuvrability. Standard
wheels are rubber-tyred, 100mm
diameter, with ball bearings for ease
of moving. The front two castors
have brakes that lock both the wheel
and swivel mechanism.
Easy operation
Simply wheel the bin onto the cradle
and press the ‘up’ button. When the
bin has emptied, press the ‘down’
button.
>
>
There’s no need to strap or clamp
the bin
>
>
Stop the machine at any time by
taking your finger off the button