59 / 72
Air Quality
1.4
AIR CONDITIONING
>
ANTI-BACTERIAL
>
ANTI-ODOUR
>
ANTI-CORROSION
>
User’s guide
Air conditioning systems are frequently prone
to mould and bacterial growth, due to humidity
and the A/C loop’s compact structure.
This may cause unpleasant odours,
impacting not only on the A/C system
(corrosion, especially on the evaporator) but
also on the passengers’ health and well-
being (sneezing, headache, allergies...).
ClimPur™ cleans and purifies the whole
air conditioning system and also helps
protecting its components.
Air Conditioning Cleaner
1.
Open the bonnet and remove the air intake grill located at the bottom of the windscreen.
2.
Take your cabin air filter(s). If necessary, refer to the technical booklet of the vehicle.
3.
Switch on. Adjust the ventilation system to the maximum (cold position, front ventilation, air conditioning stopped without interior air
recycling).
4.
Fix the stem of disperser included in the box on the aerosol.
5.
Slip the stem into the air intake at the bottom of the windscreen and empty the whole contents of the totality of the aerosol by a
series of some 5 second pressures.
Important:
The aerosol has to be held vertically.
6.
Stop the ventilation. Leave it for 10 minutes.
7.
Start again the ventilation in maximum position for 10 minutes.
8.
The treatment is finished. Replace your cabin air filter(s)*, then the grill of the air intake.
* we recommend you to replace your worn cabin air filter(s) by a new filter of the Valeo range.
For more effectiveness, disperse a little ClimPur
TM
spray on both faces of the new filter(s) before replacing.
Ref.
698984
ClimPur
TM
x1
Ref.
698985
ClimPur
TM
x15
with display
Ref.
698911
ClimPur
TM
x20
for workshop
Effective and user-friendly
Pleasant lemon perfume
59