1309 / 1618
7/49
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Hand Tools
7
Design:
XT serration for high precision. Hardened teeth. With screw-connected 2-component
pistol handle.
Application:
For all types of woods and plastics.
Order
No.
Length
mm
726G
Teeth/inch
Blade thickness
mm
0300
300
15.65
9
1.03
(W556)
Keyhole saw
Design:
3-way cut teeth. Particularly sharp blade tip to hit into the material.
Application:
For sawing recesses in plasterboard.
Order
No.
Length
mm
726H
Teeth/inch
Blade thickness
mm
0160
160
11.65
8
1.6
(W556)
Plasterboard jig saw
Design:
Made of alloyed tool steel, with reinforced back and fine, straight set and hardened
teeth. With lacquered beechwood handle.
Order
No.
Length
mm
7260
Design
Teeth/inch
0005
250
3.67
Straight
13
0010
250
4.76
Bent
13
(W555)
Fine saw
7260 0005
7260 0010
Design:
3-sided toothing with cross-sharpened with inductively hardened teeth.
Simple switching of saw blade through bending of saw handle.
Order
No.
Design
7415
7416
Teeth/inch Blade thickness
mm
0265
Trim saw 265 mm
20.50
24.90
16
0.6
1250
Spare saw blade, 250 mm
8.60
–
19
0.5
1265
Spare saw blade, 265 mm
9.10
–
16
0.6
1300
Spare saw blade, 300 mm
9.55
–
13
0.7
(W569)
(W569)
Trim saw
7415
7416
7415
With pistol handle made of plastic.
7416
With straight, rubber handle.
Design:
Fine JT serration ground on three sides with hardened teeth on one side and
progressive, rough serration on the other side. The thin and flexible blade makes a clean
cut with low effort, also level to the surface.
Application:
For quick and precise pull-stroke when sawing, wood, plasterboard,
laminated board and PVC. Ideal for smooth cuts.
Order
No.
Length
mm
726K
Teeth/inch
Blade thickness
mm
0240
240
27.65
6–8.5/16
0.5
(W556)
Trim saw
m
m
m
Saws
1309