1304 / 1618
7/44
Hand Tools
7
Design:
With low-wearing, torsion-resistant piston made of brass. Dual-valve system
with stainless steel balls. Ergonomic operating lever, locked to be used as a handle.
Application:
For precise and quick pressure and leakage testing of pipeline systems
in sanitary, heating and sprinkler installations, for compressed air, steam and cooling
systems, oil installations in boiler and pressurised vessel construction.
Order
No.
Control and pressure range
7134
Container
volume
l
Connection
inch
Performance
kW
0005
0–6 MPa/0–60 bar/0–870 psi
154.50
12
1/2
1.75
0015
0–6 MPa/0–60 bar/0–870 psi
202.00
12
1/2
1.75
(W001)
Testing pump, manual
7134 0005
7134 0015
7134
Container made of corrosion-resistant sheet steel, powder-coated.
0005
7134
Container made of stainless steel.
0015
Design:
Self-priming electric testing pump with high-performance piston pump with low-
wearing pressure piston made of stainless steel for high capacity and long service life. Intake
hose with filter to suction from containers or to connect a tube valve. Muted, glycerine-filled
pressure gauge and high-pressure hose with fabric insert to reduce measurement errors.
Application:
Pressure and leakage testing (in accordance with DIN 1988) with water, water
solutions and emulsions. For liquids with a pH value 7–12, temperature –30 °C to 60 °C and
viscosity ≤ 1.5 mPa. For the simple and quick testing of pipe systems, also suitable for large
systems.
Order
No.
Control and pressure range
7134
Suction volume
l/min
Connection
inch
Performance
kW
0050
6 MPa/60 bar/870 psi
on request ◊
7
1/2
1.75
(999)
Testing pump, electric
Design:
With connector piece and shut-off valve. Suitable for manual and electric testing
pumps (Order No. 7134 0005–0050).
Application:
For pressure checks, including after removal of testing pump. For several test
bodies and anti-theft protection.
Order
No.
Control and pressure range
7134
0105
6 MPa/60 bar/870 psi
on request ◊
(999)
Manometer for testing pump
Design:
The measurement equipment is permanently mounted in sturdy steel sheet boxes.
Self-testing pressure pump, with check valve and pressure gauge (∅ 60 mm), 0–4 bar,
detailed scaling, accuracy 0.1 bar increments.
Application:
For leakage testing of gas lines and devices with operating pressures of up to 150 mbar.
Tightness test for drinking water house installations in line with DIN 1988 (TRWI) of
3 bar/150 bar.
Load test in line with DVGW-TRGI 96 7.1.2 with test pressure of 1.0 bar.
Tightness test for water column in line with DVGW-TRI 96 7.1.3 with test pressure of
150 mbar.
Setting of atmopsheric burners and forced-air burner from 0–30 mbar.
Liquid gas test (lower pressure) with test pressure of 40–60 mbar in acc. with TRF 96 9.4.
Liquid gas test for propane/butane with test pressure of 150 mbar in acc. with TRF 96 9.4.
Supplied:
4-bar pressure pump, pressure container, rubber blow, test hose, 4 connector
tubes, 5 gas test plugs size 0–2 conical and 1–2 cylindrical as well as a supply end cap.
Order
No.
7273
0006
569.95
(W591)
Leak detector for gas and water lines ROTEST H
®
GW 150/4
INOX
Testing pumps/gas pipe testing devices
1304