1300 / 1618
7/40
Hand Tools
7
Design:
Lightweight construction with one fixed and one moving bending arm. Bending radius
display with degree scale of 0–180° in steps of 30° and clamping device to hold the pipe
better. Moveable bending arm with plastic handle.
Application:
For dimensionally accurate two-handed bending up to 180° of soft copper,
aluminium, soft steel and brass pipe. Also suitable for bending very short pipes.
Order
No.
Nominal dimension
mm
7228
Radius r
mm
Length
mm
0095
12
96.45
36
390
0100
15
115.95
54
450
(W592)
Tube benders
Design:
Compact, torsion-resistant construction. Bending radius display with scale division 45°;
90°; 135° and 180° in 15° increments, 3 pipe sizes with tight radii can be bent with one device.
Application:
Refrigeration and air-conditioning technology, oil supply, automotive, hydraulics
and compressed air technology, for precise two-handed bending of soft steel, brass and copper
pipes up to 180°.
Order
No.
For pipe ∅
mm
7228
0110
6; 8; 10
66.95
(W592)
Tube benders
Design:
With mechanical ratchet feed and ergonomic handle. Bending segments can be easily
changed with the bayonet lock.
Application:
For accurate one-handed bending of soft copper and aluminium pipes, soft,
coated copper pipe as well as soft precision steel up to 90°. For the production of U-bends,
counter-bends, swan-neck bends and connecting bends at all levels.
Supplied:
Plastic case, basic device, backing plate, backing segment and 4 bending segments.
Order
No.
For pipe ∅
mm
7224
0111
6; 8; 10; 12
259.95
(W591)
Single-hand pipe bender, with ratchet feed
Design:
Made of hardened steel. Stable design and pressure, high-sliding bending elements
and sliding pieces made of high-strength, fibre-reinforced polyamide.
Application:
For cold bending by hand or stationary in parallel vice up to 180° of e.g.:
Hard, semi-hard, soft copper pipes (also thin-walled)
∅ 10–22 mm
Soft, coated copper pipes (also thin-walled)
∅ 10–18 mm
Stainless steel pipes of the press-fitting systems
∅ 12–18 mm
C-steel pipes of Pressfitting systems (also coated up to ∅ 18 mm)
∅ 12–22 mm
Soft precision pipes
∅ 10–20 mm
Electrical installation pipes DIN EN 50086
∅ 16–20 mm
Multilayer composite pipes
∅ 14–32 mm
Supplied:
Bending drive, locking pins, bending segments with sliding block, bending spray
and steel case.
Order
No.
For pipe ∅
mm
7249
0010
12; 15; 18; 22
496.00
(W621)
Hand pipe bender
Benders
1300