1301 / 1618
7/41
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Hand Tools
7
Design:
Tried-and-tested, high-torque universal motor with 30 % power increase using
automatic carbon brush adjustment. Maintenance-free, robust transmission. Rotational
speed continuously adjustable, no setting work.
Application:
For bending up to 180° of e. g.:
Hard, semi-hard, soft copper pipes (also thin-walled)
∅ 10–35 mm
Soft, coated copper pipes (also thin-walled)
∅ 10–18 mm
Stainless steel pipes of the press-fitting systems
∅ 12–28 mm
Carbon steel pipes of the Pressfitting systems (also uncoated)
∅ 12–28 mm
Soft precision pipes
∅ 10–28 mm
Steel pipes DIN 2440
∅ 1/4–3/4"
Electrical installation pipes DIN EN 50086
∅ 16–32 mm
Multilayer composite pipes
∅ 14–40 mm
Supplied:
Electric pipe bender, locking pins, bending segments, sliding pieces and sheet
steel case.
Order
No.
For pipe ∅
mm
7249
Rated power
W
Voltage
V
Machine weight
kg
0005
15; 18; 22; 28 on request ◊
1000
230
8.0
(999)
Pipe bender, electric
Design:
Made of high-strength, glass-fibre-reinforced polyamide, great gliding
quality and resistant to compression, with angle scale. Suitable for electric pipe
benders (Order No. 7249 0005) and pipe bending pliers (Order No. 7249 0010).
Order
No.
For pipe ∅
mm
7249
1005
10
183.90
1010
12
118.00
1015
15
132.50
1020
18
132.50
1025
22
163.50
(W623)
Bending segment with sliding block
Design:
Robust beinding device
with mechanical feed,
making single-handed use
possible. Stable design and pressure, high-sliding bending elements and sliding
pieces made of high-strength, fibre-reinforced polyamide.
Application:
For single-handed bending up to 180° of e. g.:
Soft copper pipes (also thin-walled)
∅ 10–22 mm
Soft, coated copper pipes (also thin-walled)
∅ 10–18 mm
Coated carbon steel pipes of the press-fitting systems
∅ 12–18 mm
Soft precision pipes
∅ 10–18 mm
Multilayer composite pipes
∅ 14–32 mm
Supplied:
Bender drive, bending segments 1 cross bar with sliding piece and sheet
steel case.
Order
No.
For pipe ∅
mm
7249
0015
12; 15; 18; 22
212.00
(W001)
Single-hand pipe bender, with quick feed
Design:
With 2 bending tools, one sharp-edged with a 4 mm radius and one with radii of
15 and 25 mm. The angle and length stops can be continuously adjusted. With bending
lever extension for
mounting on a workbench.
Application:
For bending flat, rectangular, round and angled material made of steel,
copper and aluminium up to 90°.
Max. bending rate:
Cold mm Warm mm
Flat steel EN 10058 (DIN 1017)
100 x 10 100 x 20
80 x 12
80 x 25
50 x 15
–
Rectangular steel EN 10059 (DIN 1014)
22
30
Round steel EN 10060 (DIN 1013)
25
30
Angle steel EN 10056-1 (DIN 1028)
100 x 10 100 x 12
Max. bending capacity related to the dimension of the materials ST 37 up to material
strength 370 N/mm
2
.
Note:
Special bending tool as accessory on request.
Order
No.
Working height
mm
7234
0001
100
1257.00
(W522)
Eccentric angular bender
Benders
1301