1559 / 1618
9/119
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Soldering/Welding/
Workshop Equipment
9
Design:
Contact adhesive, free from hexanaphthene, high heat resistance to 100 °C.
Application:
Ideal for combination gluing of wooden materials with decorative laminates,
rubber, leather, cork, felt, hard PVC, soft foams, metal and lots more.
Note:
Not suitable for polypropylene, polyethylene, polystyrene, soft PVC and artificial leather.
Order
No.
Design
9905
PU
0015
50 g tube
on request
12
0005
125 g tube
on request
12
0010
300 g can
on request
12
0020
650 g can
on request
6
(999)
Strong adhesive Pattex
®
Classic
Design:
Contact adhesive, free from hexanaphthene. Clean, non-stringy and does not drip.
Application:
Ideal for combination gluing of wooden materials with decorative laminates,
rubber, leather, cork, felt, hard PVC, soft foams, metal and lots more.
Note:
Not suitable for polypropylene, polyethylene, polystyrene, soft PVC and artificial leather.
Order
No.
Design
9905
PU
0022
50 g tube
on request
12
0025
125 g tube
on request
12
0030
625 g can
on request
6
(999)
Strong adhesive Pattex
®
Gel Compact
Design:
Two-component acrylate adhesive, fast-hardening. Temperature resistance from
-20 °C to +80 °C.
Application:
Ideal for stone, plastic, ceramic, wood, metal. Especially suitable for materials
with an uneven surface.
Order
No.
Design
9905
PU
0045
30 g tube
on request
6
0050
80 g tube
on request
6
(999)
Strong adhesive Pattex
® S
tabilit Express
Design:
Low electricity consumption thanks to electronic temperature control with PTC heat
technology. Very high melting power, the heat-insulated silicone nozzle and the mechanical
feed allow for a fast application of glue as well as the precise dosing of the melted adhesive.
Application:
Clean, even and fast bonding in the home and workshop.
Note:
For appropriate melt adhesive see (Order No. 9905 0037).
Order
No.
Design
9905
Weight
g
0035
Hot glue gun for glue sticks with ∅ 11.0 mm
28.00
480
(W984)
Hot glue gun Pattex
®
Supermatic
Design:
Transparent, high-strength, melting temperature approx. 200 °C, by heating the
glued spots become loose again. After 2 minutes, the splice is strong and resilient.
Application:
For almost all materials except soft plastic (PVC), polyethylene (PE),
polypropylene (PP), polytetrafluorethylene (PTFE) and Styropor
®
.
Order
No.
Design
9905
Length
mm
0037
1 kg package
on request
200
(999)
Pattex
®
hot adhesive cartridge
Adhesives
1559