1561 / 1618
9/121
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Soldering/Welding/
Workshop Equipment
9
Design:
Solvent-free two-component adhesive with an epoxy resin base, for fast,
load-bearing adhesion. Enables high-strength gluing on almost all solid materials. The
processing time is up to 5 minutes, firmness to touch is achieved after 20 minutes. End
strength is approx. 1300 N/cm
2
. The adhesive bond cures transparent, impact-resistant,
non-aging and moisture resistant.
Application:
For fast, load-bearing adhesions. Enables high-strength gluing on almost all
solid materials.
Order
No.
Design
9913
PU
0055
35 g tubes (binder and hardener)
on request
6
(999)
Reaction adhesive UHU PLUS SCHNELLFEST
Design:
Solvent-free two-component adhesive with an epoxy resin base, for very high loads.
The processing time is up to 90 minutes. Curing and ultimate strength (up to 3000 N/cm
2
) are
temperature-dependent. Hard after 12 hrs at room temperature. The adhesive bond is impact-,
ageing- and moisture-resistant.
Application:
For metal, glass, porcelain, wood, marble, stone, concrete, thermosetting plastic,
glass fibre reinforced plastic, rigid PVC, rubber and lots more.
Note:
Not suitable for polyethylene, polypropylene, polytetrafluoroethylene, polystyrene, soft
PVC and adhesions on large glass surfaces.
This product is subject to the prohibition of self service from the Chemical Prohibition
Regulation (ChemVerbotsV).
Order
No.
Design
9913
PU
0005
33 g tubes (binder and hardener)
on request
6
0010
163 g tubes (binder and hardener)
on request
1
0015
50 ml double chamber cartridge
on request
m
6
0035
Binder 915 g can
on request
3
0040
Hardener 740 g can
on request
3
(999)
Reaction adhesive UHU PLUS ENDFEST 300
9913 0005
9913 0015
9913 0040
Order
No.
Design
9913
PU
0020
Dosing device
69.90
1
0030
Curved mixer
1.33
10
0025
Short mixer
1.03
10
0050
Medium mixer
1.13
10
(W993)
Accessories for double chamber cartridges
9913 0020
9913 0030
9913 0025
9913 0050
m
m
Adhesives
1561