658 / 1618
3/136
Clamping
Systems
3
Design: Clamping system mechanical/mechanical with power
transmitter, manually operated.
The stable steel base body and all
guides have been hardened and ground on all sides, all clamping slides
with cross grooves are hardened on all sides and the functional surfaces
ground. The drive spindle is provided with pre-setting of clamping force.
With clamping surfaces for clamping jaws and stable chip protection,
prevents chips from penetrating the interior of the body. All wear-prone
guides and the spindle thread can be greased using grease nipples
mounted on both sides. Turning the clamping jaws extends the clamping
range.
Application:
Ideal for use on machining centres. Can be clamped base
side.
Scope of delivery:
NC compact clamping system
with a stationary and
a movable stepped jaw.
Note:
For clamping jaws and T-nut set see (Order No. 3851
Ç
3/138).
For suitable hand crank see (Order No. 3856
Ç
3/137).
Order
No.
Jaw width
mm
3845
Jaw height
mm
Clamping range
mm
extended clamping range
mm
Clamping force
kN
Weight
kg
1125
125
1851.00
40
0–216
97–312
40
41
1160
160
2872.00
50
0–320
131–451
60
79
(W001)
NC compact clamp FKS, mechanical/mechanical
Design:
Steel body and guides are hardened and ground on all sides.
Long clamping slide with clutch. Drive spindle with pre-setting of
clamping force. Turning the clamping jaws extends the clamping
range.
Application:
Ideal for use on machining centres.
Note:
Horizontal, lateral and vertical (when combined with a base
plate) clamping possible, for example as DUO clamping tower
(back to back).
Order
No.
Jaw width
mm
3844
Jaw height
mm
Clamping range
mm
extended clamping range
mm
Clamping force
kN
Weight
kg
1092
92
2101.00
32
0–138
71–208
25
15
1125
125
2410.00
40
0–216
97–312
40
41
1160
160
3739.00
50
0–320
131–451
60
79
1200
200
4110.00
60
0–315
131–451
60
85
(W333)
NC compact clamping system RKE
Design: Clamping system mechanical/mechanical with power
transmitter, manually operated,
short, compact design. The sturdy
steel base body and all guides are hardened and ground. With stable
chip protection, tension and large clamping range. The workpiece
0-point is located on the operator side. The RKE-LV enables precisely
accurate positioning and minimum machining times. No displacement
of the movable top jaw. Turning the clamping jaws extends the
clamping range.
Application:
Ideal for use on machining centres.
Collision-free 5-side processing in one clamp.
Scope of delivery:
NC compact clamping system RKE_LV
with a stationary and a movable WZR stepped jaw.
Order
No.
Jaw width
mm
3856
Jaw height
mm
Clamping range
mm
extended clamping range
mm
Clamping force
kN
Weight
kg
0125
125
2410.00
40
0–96
96–192
40
29
(W333)
NC compact clamping system RKE-LV
Extended clamping range by reversing the jaws.
Extended clamping range by reversing the jaws.
Extended clamping range by reversing the jaws.
Machine vices
658