663 / 1618
3/141
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Clamping
Systems
3
Design:
With hardened claw tips. Thus the clamping forces are increased by factor 3–5 in
contrast to standard jaws and 5-side machining is enabled in one clamping. This results in less
loss of material on the workpiece, shorter machining times as well as shortened production and
costs per piece.
Application:
Can be used for the manual or hydraulic clamping of parallel unmachined and
sawn parts on vices.
For universal use by screwing on the RÖHM NC compact clamping
system.
Clever alternative to stamping.
Order
No.
Jaw width
mm
3847
Set
3859
Set
Jaw height
mm
Jaw thickness
mm
0092
92
350.00 ◊
288.00 ◊
32
14
0125
125
433.00
361.00
40
16
0160
160
608.00
505.00
50
18
(W335)
(W335)
Sets of claw jaws for NC compact clamping systems.
Clamping solutions such as the embossing method are fully
responding to current trends. In the process, a mark is being
embossed onto the workpiece in an embossing station. Special
embossing jaws grip exactly into these small recesses on the
clamping action into the vice.
Exactly this very effect the innovative RÖHM claw jaws offer. Yet
using this technology, your goals will be achieved even faster and
more cost-effectively. Because ‘embossing’ and clamping are carried
out in one single processing step – and you can spare an embossing
station.
3847
Claw jaw SKB with fine stage.
3859
Claw jaw SKB without fine stage.
3859
3847
Design:
For machine vices RKE (Order No. 3844), RKE-LV (Order No. 3856) and RKZ-M
(Order No. 3858).
Order
No.
Jaw width
mm
3863
Set
3864
Set
Height
mm
0125
125
92.70
116.00
39.6
(W335)
(W335)
Normal jaw set
3863
Type SGN,
one smooth side, one grooved side.
3864
Type SGNf,
one finely grooved side, one long-grooved side.
3864
3863
Design:
With horizontal and vertical V-block. For compact clamping system (Order No. 3858)
and centric vice RZM (Order No. 3854).
Order
No.
Jaw width
mm
3841
Set
Height
mm
V-block height
mm
Horizontal clamping range
mm
Vertical clamping range
mm
0140
125
433.00
40
24
15–40
18–60
(W332)
V-block jaw set PB
m
Jaw sets
663