729 / 1618
4/9
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Measuring
Equipment
4
Design:
Made of stainless steel, hardened, measuring faces precision ground,
with locking screw, digit height of LCD 12 mm. Supplied with battery CR 357,
1.5 V, in a plastic case.
Function:
On and off switch, mm/inch-switching, reset (zero setting) possible in
any position.
Application:
For inside, outside, depth and step measurements.
Note:
Replacement battery: (Order No. 4026 0357,
Ç
4/13).
Order
No.
Measurement range
mm
4007
Design
Reading
Jaw length
mm
0150
150
36.90
with rectangular depth gauge
0.01 mm (0.0005 inch)
40
(W409)
Digital pocket caliper with metal housing
DIN
862
INOX
Design:
Made of stainless steel, hardened, measuring faces precision ground, with locking
screw. Digit height of the LCD display 12 mm, with data output RS 232. Supplied with
battery CR 357, 1.5 V, in plastic case.
Functions:
On and automatic off switch, mm/inch switching, key lock set for zero position,
no re-zeroing after switching (absolute system), reset (zeroing) possible at each position.
Application:
For inside, outside, depth and step measurements.
Note:
Replacement battery: (Order No. 4026 0357,
Ç
4/13).
Pocket caliper for left-handers
Order
No.
Measurement range
mm
4007
Design
Reading
Jaw length
mm
2150
150
66.70
with rectangular depth gauge
0.01 mm (0.0005 inch)
40
(W409)
Design:
Made of stainless steel, hardened, metal housing, with locking screw. Supplied with
adapter for drive roller and battery CR1632, 3 V, in plastic case.
Functions:
On and automatic off switch, mm/inch switching, automatic switching by means
of slider movement, no re-zeroing after switching (absolute system), reset (zeroing) possible
at each position.
Application:
For inside, outside, depth and step measurements.
Note:
Replacement battery available upon request.
Order
No.
Measurement range
mm
4007
Design
Reading
Jaw length
mm
3150
150
51.30
with rectangular depth gauge
0.01 mm (0.0005 inch)
40
3200
200
66.70
with rectangular depth gauge
0.01 mm (0.0005 inch)
50
3300
300
107.50
with rectangular depth gauge
0.01 mm (0.0005 inch)
60
(W409)
Digital pocket caliper with absolute system
The Absolute System
•
The measuring tool is always ready to measure
• The zero position stays locked for other measurements
after setting once.
• No zeroing after switching.
Absolute
function
DIN
862
INOX
Absolute
function
RS232
DIN
862
INOX
Absolute
function
m
Digital pocket caliper
729