731 / 1618
4/11
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Measuring
Equipment
4
Protection class overview
First
Importance for protection
Digit
of operating equipment
0
Not protected
1
Protection against penetration by solid foreign bodies
With a diameter larger than 50 mm
2
Protection against penetration by solid foreign bodies
With a diameter larger than 12.5 mm
3
Protection against penetration by solid foreign bodies
With a diameter larger than 2.5 mm
4
Protection against penetration by solid foreign bodies
With a diameter larger than 1 mm
5
Protected against dust
6
Dust-tight
Example:
measuring instrument with protection
IP 67:
(IP – International Protection).
This is a dust-proof measuring device that can be briefly
submerged.
Second Water protection
Digit
0
Not protected
1
Protection against vertical drips
2
Protection against dripping water with 15° incline
3
Protection against water spray
4
Splashproof
5
Protection against jets of water
6
Protection against strong jets of water
7
Protection against temporary submersion
8
Protection against prolonged submersion
Design:
Made of stainless steel, hardened, measuring faces precision
ground, with locking screw, digit height of LCD display 8.5 mm,
inductive measurement system. Supplied with battery CR 2032, 3 V,
in plastic case.
Functions:
On and automatic off switch, mm/inch switching,
automatic switching by means of slider movement, key lock set for
zero position, no re-zeroing after switching (absolute system), reset
(zeroing) possible at each position, ± pre-set function (measurement
value presetting).
Application:
For inside, outside, depth and step measurements.
Note:
Replacement battery: (Order No. 4026 2032,
Ç
4/13).
Order
No.
Measurement range
mm
4023
Design
Reading
Jaw length
mm
1150
150
138.00
with round depth gauge
0.01 mm (0.0005 inch)
40
1151
150
138.00
with rectangular depth gauge
0.01 mm (0.0005 inch)
40
1200
200
200.50
with rectangular depth gauge
0.01 mm (0.0005 inch)
50
1300
300
259.00
without depth gauge
0.01 mm (0.0005 inch)
65
(W404)
Digital pocket caliper waterproof
Design:
Made of stainless steel, hardened, lapped guideway, with
locking screw, digit height of LCD display 8.5 mm. Supplied with
battery CR 2032, 3 V, in a plastic case.
Functions:
Automatic on and off switch, automatic switching by
means of slider movement, mm/inch switching, key lock set for
zero position, no re-zeroing after switching (absolute system), reset
(zeroing) possible at each position, ± pre-set function (measurement
value presetting).
Application:
For inside, outside, depth and step measurements.
Order
No.
Measurement range
mm
4020
Design
Data output
Reading
Jaw length
mm
1310
150
109.50
with round depth gauge
–
0.01 mm (0.0005 inch)
40
1320
150
109.50
with square depth gauge
–
0.01 mm (0.0005 inch)
40
1330
150
135.00
with round depth gauge
RS232, Digimatic, USB 0.01 mm (0.0005 inch)
40
1340
150
135.00
with square depth gauge
RS232, Digimatic, USB 0.01 mm (0.0005 inch)
40
1350
200
188.00
with square depth gauge
RS232, Digimatic, USB 0.01 mm (0.0005 inch)
50
1360
300
239.00
without depth gauge
–
0.01 mm (0.0005 inch)
64
(W488)
Digital pocket calipers
Note:
Depth measuring bridge 75 x 7 mm (order no. 4024 0075,
Ç
4/13).
Replacement battery (Order No. 4026 2032,
Ç
4/13).
Data cable Digimatic (Order No. 4246 0190,
Ç
4/54).
Data cable USB (Order No. 4246 0195,
Ç
4/54).
Data cable RS 232 (Order No. 4246 0180,
Ç
4/54).
DIN
862
INOX
Absolute
function
RS232
Digimatic
USB
∅ 1,5 mm
m
DIN
862
INOX
IP 67
Absolute
function
Certificate
∅ 1,5 mm
Digital pocket caliper
731