753 / 1618
4/33
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Measuring
Equipment
4
Design:
Measuring spindle rustproof, fully hardened and ground, lacquered steel bracket,
advance ratchet stop, quick drive and thermal protection. Digit height of the LCD display
8.5 mm, protection in acc. with IP 65,
data output RS 232, Digimatic and USB
. Supplied
with battery CR 2032, 3 V, in case.
Functions:
On and automatic off switch, mm/inch switching, automatic switching by
means of turning the drum, key lock set for zero position, re-zeroing after switching deleted
(absolute system), ABS (switching from relative to absolute measurement), reset (zeroing)
possible at each position, ± pre-set function (setting a numerical value).
Note:
Replacement battery: (Order No. 4026 2032,
Ç
4/13).
Radio receiver (Order No. 4942 0030,
Ç
4/129).
Transmitter module for e-Stick (Order No. 4942 0040,
Ç
4/130).
Data cable RS 232 (Order No. 4942 0055,
Ç
4/130).
Data cable USB (Order No. 4942 0050,
Ç
4/130).
Data cable Digimatic (Order No. 4246 0185,
Ç
4/54).
Order
No.
Measurement range
mm
4111
Reading
mm
Spindle ∅
mm
Gradient
mm
2025
0– 25*
259.00
0.001
6.5
0.635
2050
25– 50*
297.00
0.001
6.5
0.635
2075
50– 75*
389.00
0.001
6.5
0.635
2100
75–100*
447.00
0.001
6.5
0.635
2125
100–125
600.00
0.001
6.5
0.635
2150
125–150
615.00
0.001
6.5
0.635
2175
150–175
633.00
0.001
6.5
0.635
2200
175–200
645.00
0.001
6.5
0.635
(W488)
Digital outside micrometer
* Factory standard
Order
No.
Measurement range
mm
4111
Set contents
2210
0–100
1365.00
1 outside micrometer, 0– 25 mm
1 outside micrometer, 25– 50 mm
1 outside micrometer, 50– 75 mm
1 outside micrometer, 75–100 mm)
3 setting standards, 25; 50 and 75 mm
(W488)
Digital outside micrometer set
Design:
Reading parts matt chrome-plated, hardened steel measuring surfaces, measuring
force regulation by means of ratchet stop, with non-rotating spindle and hand thermal
insulation. Supplied with adjustment key, from measuring range 25-50 mm with setting
measurement, in a plastic case.
Application:
For measuring outer grooves.
Order
No.
Measurement range
mm
4119
Reading
mm
Spindle ∅
mm
Gradient
mm
Drum ∅
mm
Measuring face
mm
0025
0– 25
286.00
0.01
6.5
0.5 18.0 0.75 x 6.0
0050
25– 50
346.50
0.01
6.5
0.5 18.0 0.75 x 6.0
0075
50– 75
372.00
0.01
6.5
0.5 18.0 0.75 x 6.0
0100
75–100
403.00
0.01
6.5
0.5 18.0 0.75 x 6.0
(W416)
Outside blade micrometer for external grooves
Design:
Reading parts matt chrome-plated, hardened spindle, lapped measuring plane-parallel
plate, measuring force regulation by means of ratchet stop, with hand thermal insulation,
locking by means of clamping lever. Supplied with adjustment key, in a plastic case.
Application:
For reference-free measuring tooth widths of spur gears and toothed wheels
for modules 0.5–6.0 mm. Also suitable for measuring the thickness of soft materials such as
rubber, plastic, paper, etc.
Order
No.
Measurement range
mm
4120
Reading
mm
Spindle ∅
mm
Gradient
mm
Drum ∅
mm
Measuring plate
mm
0025
0– 25
84.60
0.01
6.5
0.5 17.0
20.0
0050
25– 50
93.80
0.01
6.5
0.5 17.0
20.0
0075
50– 75
109.00
0.01
6.5
0.5 17.0
20.0
0100
75–100
121.50
0.01
6.5
0.5 17.0
20.0
0125
100–125
143.00
0.01
6.5
0.5 17.0
30.0
0150
125–150
149.00
0.01
6.5
0.5 17.0
30.0
(W416)
Outside disc micrometer for tooth width measurements
DIN
863
DIN
863-1
INOX
Absolute
function
IP 65
RS232
USB
Digimatic
Factory
standard
m
m
Digital outside micrometer
753