752 / 1618
4/32
Measuring
Equipment
4
Design:
Measuring faces carbide-tipped, digit height of LCD display 6.5 mm. With
measuring force controls by means of ratchet stop, clamping lever and hand thermal
protection. Supplied with dimension adjustment, from measuring range 25–50 mm
with setting measurement and battery CR 357 1.5 V, in a plastic case.
Function:
Switch-on and switch-off, reset (zeroing) possible in any position, automatic
switch-off.
Note:
Replacement battery: (Order No. 4026 0357,
Ç
4/13).
Order
No.
Measurement range
mm
4106
Reading
mm
Spindle ∅
mm
Gradient
mm
0025
0– 25
86.00
0.001
6.5
0.5
0050
25– 50
102.50
0.001
6.5
0.5
0075
50– 75
112.50
0.001
6.5
0.5
0100
75–100
122.00
0.001
6.5
0.5
(W404)
Digital outside micrometer
Design:
Measuring spindle rustproof, fully hardened and ground, lacquered steel bracket,
advance ratchet stop, quick drive and thermal protection. Digit height on LCD display
8.5 mm,
protected in acc. with IP 65
. Supplied with battery CR 2032, 3 V, in case.
Functions:
On and automatic off switch, mm/inch switching, automatic switching by
means of turning the drum, key lock set for zero position, re-zeroing after switching
deleted (absolute system), ABS (switching from relative to absolute measurement),
reset (zeroing) possible at each position, ± pre-set function (setting a numerical value).
Note:
Replacement battery: (Order No. 4026 2032,
Ç
4/13).
Order
No.
Measurement range
mm
4111
Reading
mm
Spindle ∅
mm
Gradient
mm
2010
0–25
202.50
0.001
6.5
0.635
(W488)
Digital outside micrometer, IP 65
DIN
863
Factory
standard
INOX
Absolute
function
IP 65
m
Design:
Measuring faces carbide-tipped, ratchet integrated in measuring drum. With
clamping lever, quick drive and hand thermal protection. Digit height of the LCD 7.5 mm,
inductive measuring system, with variable data output RS 232, USB and Digimatic
(DATA Variable). Supplied with battery CR 2032, 3 V, in plastic case.
Functions:
On and automatic off switch, mm/inch switching, automatic switching by
means of turning the drum, key lock set for zero position,
re-zeroing after switching
deleted (absolute system)
, reset (zeroing) possible at each position, ± pre-set function
(setting a numerical value).
Note:
Replacement battery: (Order No. 4026 2032,
Ç
4/13).
Data cable Digimatic (Order No. 4025 0004,
Ç
4/13).
Data cable USB (Order No. 4025 0003,
Ç
4/13).
Data cable RS 232 available on request.
Order
No.
Measurement range
mm
4108
Reading
mm
Spindle ∅
mm
Gradient
mm
0025
0– 25
200.50
0.001
6.5
0.635
0050
25– 50
256.00
0.001
6.5
0.635
0075
50– 75
355.50
0.001
6.5
0.635
0100
75–100
408.50
0.001
6.5
0.635
(W404)
Digital outside micrometer
DIN
863-1
Absolute
function
RS232
USB
Digimatic
Design:
Lacquered steel bracket, advance ratchet stop, quick drive and thermal
protection. Digit height on LCD display 8.5 mm, protected in acc. with IP 40.
Supplied with battery CR 2032, 3 V, in case.
Functions:
On and automatic off switch, mm/inch switching, automatic switching
by means of turning the drum, key lock set for zero position, re-zeroing after
switching deleted (absolute system),
ABS (switching from relative to absolute
measurement),
reset (zeroing) possible at each position, ± pre-set function
(setting a numerical value).
Note:
Replacement battery: (Order No. 4026 2032,
Ç
4/13).
Order
No.
Measurement range
mm
4111
Reading
mm
Spindle ∅
mm
Gradient
mm
2000
0–25
151.00
0.001
6.5
0.635
(W488)
Digital outside micrometer, ABS System
DIN
863-1
Absolute
function
IP 40
m
Digital outside micrometer
752