747 / 1618
4/27
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Measuring
Equipment
4
4093 0050–0150
Design:
Made of rustproof steel, hardened, with locking screw, digit
height of LCD display 7.5 mm, with data output variable RS 232,
USB and Digimatic (DATA Variable). Supplied in wooden case.
Functions:
On and automatic off switch, mm/inch switching, key
lock set for zero position, re-zeroing after switching deleted (absolute
system), reset (zeroing) possible at each position, ± pre-set function
(setting a numerical value).
Note:
Replacement battery: (Order No. 4026 2032,
Ç
4/13).
Data cable Digimatic (Order No. 4025 0004,
Ç
4/13).
Data cable USB (Order No. 4025 0003,
Ç
4/13).
Data cable RS 232 available on request.
Order
No.
Measurement
range
mm
4093
Reading
Bridge
length
mm
Measuring bar
cross-section
mm
5300
300
432.50
0.01 mm (0.0005 inch)
150
12 x 4
5500
500
503.00
0.01 mm (0.0005 inch)
150
12 x 4
(W410)
Digital depth gauge calipers with stepped measuring rod
Design:
For mounting the adjustable depth gauge needle with ∅ 2 mm and a measuring depth
from 200 mm. The depth gauge needle is stretched and adjusted by means of the cord screw
at the top of the gauge. Supplied in plastic case.
Order
No.
Measurement range
mm
4093
Reading
mm
Housing ∅
mm
1 pointer revolution
mm
1030
30
218.50
0.01
58
1
(W423)
Depth gauge with bored through toothed rack
Order
No.
Measurement range
mm
4093
0002
200
8.60
(W423)
Measuring needle for depth gauge with bored through toothed rack
Design:
The measuring bridge matt chrome-plated and hardened. Support surface finely
lapped. The clamping collet made of metal guarantees reliable clamping of the dial gauge
and thus increases the measurement certainty. An additional socket head screw makes it
easier to replace the dial gauge. Measuring insert with external thread M2.5.
The millimetre display on Order No. 4093 0030 has a concentric layout, permitting a
simple and reliable reading. Supplied with a 10 mm-long special measuring insert and
measuring bridge 80 x 16 mm, in plastic case.
Note:
You can find suitable measuring inserts on
Ç
4/49.
Order
No.
Measurement
range
mm
4093
Reading
mm
Housing ∅
mm
Support surface
mm
1 pointer
revolution
mm
0010
10
124.50
0.01
58
80 x 16
1
0030
30
176.00
0.01
58
80 x 16
1
(W423)
Depth gauge
Werks-
norm
4093 0010
4093 0030
Design:
The measuring bridges have a mounting hole ∅ 8 mm H7. They are matt chrome-plated
and hardened. The support surfaces are finely lapped.
Order
No.
Dimensions
mm
4093
0050
50 x 16
58.00
0080
80 x 16
58.00
0120
120 x 20
66.60
0150
150 x 20
92.90
(W423)
Measuring bridge for depth gauge
Factory
standard
INOX
IP 67
Certificate
Absolute
function
RS232
USB
Digimatic
Factory
standard
m
Factory
standard
Digital depth gauge calipers/depth gauge
747