824 / 1618
4/104
Measuring
Equipment
4
Design:
Contact surface finely ground, evenness acc. DIN 876-2.
With 2 sliding tailstocks. Left tailstock with fixed tip, right tailstock
with sprung tip, stroke approx. 10 mm. Lock of tailstocks via eccentric
clamp. With T-groove and measuring stand. With dial gauge adapter
∅ 8 mm H7 and fine adjustment. Supplied in transport packaging.
Concentricity gauge
Design:
With rotary collet chuck device.
Note:
Collet F10 from 1–7 mm available upon request.
Order
No.
Tip height
mm
4315
T-slot width
mm
1005
50
379.00
10
1010
75
420.00
10
(W410)
Tailstock left
Application:
Prism inserts are replaced at the tips in the tailstocks.
Order
No.
Tip height
mm
4315
Prism mount ∅
mm
1000
50/75
88.20
3–15
(W410)
Prism insert pair
DIN
876-2
Order
No.
Tip
height
mm
4315
Tip
width
mm
T-slot
width
mm
Base
plate
mm
0200
50
610.00
200
10 350 x 110
0350
50
774.00
350
10 500 x 110
0275
75
697.00
200
10 350 x 110
0375
75
794.00
350
10 500 x 110
(W410)
Design:
Concentricity gauge Without points, disc blocks can be
moved on the base plate. 1 disc block can be adjusted 30 mm in
height for diameter alignment High accuracy due to backlash-free
bearing-supported rotating discs, concentricity 5 µm, bearing capacity
maximum 50 kg. Supplied with measuring stand, in transport
packaging.
Note:
Supplied without dial gauge.
Dial gauges are found from
Ç
4/45.
Order
No.
Disc
distance max.
mm
4315
Workpiece
∅ max.
mm
Disk
∅
mm
0401
400
3125.00 ◊
250
120
(W410)
Concentricity gauge with disk blocks
Concentricity gauges
824