825 / 1618
4/105
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Measuring
Equipment
4
Design:
Vertical base plate with 3 hardened support surfaces,
adjustable. Measuring beam made of hard anodised aluminium,
aluminium tailstock. Vertical and horizontal alignment. Load capacity
up to 15 kg. Supplied in transport packaging.
Application:
For fast measurement of diameters, distances, shoulders,
run-out and concentricity etc. For vertical and horizontal use.
Note:
Supplied without measuring stand, dial gauge or guide rail.
Dial gauges are found from
Ç
4/45.
Order
No.
Tip
height
mm
4315
Tip
width
mm
T-slot
width
mm
Base
plate
mm
0550
75
907.00
550 10.1 + 0.1 200 x 150
(W410)
Shaft testing device vertical and horizontal in lightweight design
4315
Order
No.
Design
4314
0005
Measuring stand with guide rail
328.50
0010
Measuring stand with holder
73.50
(W410)
Accessories for aluminium shaft testing device
4314 0005
4314 0010
Design:
Robust construction, large application area. Analogue
and digital dial gauges can optionally be used Dial gauge mounting
hole ∅ 8 mm, repeatability 2 µm. Supplied with pairs of probes
(Order No. 4314 0040 and 4314 0050) and probe holder
(Order No. 4314 0085 and 4314 0090), in aluminium case.
Application:
For the determination of internal and external
diameters on grooves and reliefs in the comparative measuring
procedure. The measurement to be taken is determined at the
reversal point between a fixed and a moveable probe element.
Particularly suitable for serial measurements.
Note:
Supplied without dial gauge.
Dial gauges are found from
Ç
4/45.
Order
No.
Dimensions
mm
4314
Internal
measurement
mm
External
measurement
mm
0015
150 x 150 x 68
1793.00 ◊
21–200
0–180
(W410)
Universal comparator gauge
Order
No.
Dimensions
mm
4314
0020
269 x 149
192.00 ◊
(W410)
Support plate for universal comparator gauge
(not shown)
Shaft testing devices/comparative measuring instruments
825