869 / 1618
4/149
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Measuring
Equipment
4
Design:
Made of robust plastic and silver-coloured anodised aluminium. With one circular
horizontal and one vertical bubble, two milled measuring faces strong holding magnets. Fast,
electronic measurement of angles between 0° and 90°. The measurement value display is
two decimal places between 0° and 1°, and between 1° and 90° with one decimal place. Hold
function (measuring value storage) for 9 values, displayed in degrees, inch/feet or percent as
well as with acoustic signal when reaching the horizontal or vertical position or a 45° angle.
Wall line laser or the optical extension of the measuring surface.
Measuring accuracy of bubbles at least 0.5 mm/m for normal and reversal measurements.
Accuracy of the electronic measurement at least 0.2°. Supplied with 2 micro batteries
AAA/LR03, 1.5 V, in transport case.
Application:
Suitable for horizontal and vertical normal, reverse and overhead measurements.
Also for the measurement of slopes, inclines and straight lines, as well as for testing the
planarity of surfaces.
Note:
Replacement battery: (Order No. 9041 0023,
Ç
9/12).
Order
No.
Length
cm
4724
Cross-section
mm
0060
60
104.00
72 x 33
(W465)
Digital laser-spirit level DigiLevel Laser
Design:
Made of silver-coloured anodised aluminium. With one circular horizontal and one
vertical bubble, two milled measuring faces, shock-absorbent end caps and strong holding
magnets. The illuminated display turns automatically during overhead measurements. Fast,
electronic measurement of angles between 0° and 90°. The measurement value display takes
place between 0° and 1° with two decimal places, and between 1° and 90° with 1 decimal place.
Hold function (measuring value storage) for 9 values, displayed in degrees, inch/feet or percent
as well as with acoustic signal when reaching the horizontal or vertical position or a 45° angle.
Point laster for the exact transfer of heights and angles. Measuring accuracy of bubble level
indicators at least 0.5 mm/m for normal and reverse measurements. Accuracy of the electronic
measurement at least 0.2°. Supplied with 2 micro batteries AAA/LR03, 1.5 V, in carrying case.
Application:
Suitable for horizontal and vertical normal, reverse and overhead measurements.
Also for the measurement of slopes, inclines and straight lines, as well as for testing the planarity
of surfaces.
Note:
Replacement battery: (Order No. 9041 0023,
Ç
9/12).
Order
No.
Length
cm
4732
Cross-section
mm
0300
30
75.30
60 x 33
0600
60
111.00
60 x 33
(W465)
Digital laser-spirit level DigiLevel Pro
Drilling machine vice
Forged, extremely stable
and large clamping range.
Ç
3/131
Angle measurement devices/spirit levels
869