873 / 1618
4/153
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Measuring
Equipment
4
Design:
Stable, ergonomic enclosure with protective rubber ring with with large, illuminated
LCD display. Shows wood groups, building materials, measurement value, bar display,
wet-dry indication, minimum and maximum values. Can be switched from °C to °F, automatic
and manual temperature compensation, self-test function, exchangeable measuring tips and
automatic deactivation. Supplied with protective cap with self-test function and 4 batteries
AAA/LR03, 1.5 V, in carrying bag.
Accuracy:
Wood with 0–30 % moisture:
± 1.0 %
30–60 % moisture:
± 2.0 %
60–90 % moisture:
± 4.0 %
Other materials:
± 0.5 %
Application:
For the measurement of moisture in 3 groups of wood and 8 construction materials.
Note:
Replacement battery: (Order No. 9041 0023,
Ç
9/12).
Order
No.
Measurement range
%
4922
0007
0–90
177.50
(W465)
Wood and building moisture analyser DampMaster Compact
Design:
Measuring instrument with illuminated, clear LC display, with selectable time
evaluation for optimum adjustment to noise dynamics. With 16000 memory points or realtime
logging on the PC. With switchable analog display for visual assessment. Can be calibrated
and adjusted using a standard noise level calibrator (94 dB/1kHz). Microphone with removable
wind guard. Analog outputs DC and AC. Supplied with software and 6 micro batteries
AAA/LR03, 1.5 V, in carrying case.
Frequency range 31.5 Hz – 8000 Hz. dynamic range 50 dB, noise level resolution 0.1%,
accuracy ± 1.5 dB.
Note:
Replacement battery: (Order No. 9041 0023,
Ç
9/12).
Order
No.
Noise level dB (A)/dB (C)
4929
Dimensions
mm
0005
30–130/30–135
177.50
245 x 80 x 35
(W465)
Noise meter SoundTest-Master
Design:
Measuring device for determining non-metallic layers on metal substrates. The layer
thickness measurement takes place using the indication and eddy-current principles. With
illuminated, clear LCD display and USB interface for the transmission of measurement data and
evaluations via software. The small measuring head permits highly accurate measurement of
the layer thickness. Internal memory for 400 measurement values. Supplied with calibration
references, software, USB cable and 2 micro batteries AAA/LR03, 1.5 V, in plastic case.
Accuracy 0–850 µm (± 3 % + 1 µm), 850–1250 µm (± 5 %).
Application:
Automatic detection of the subsurface materials (ferrous/ferromagnetic,
non-ferrous/non-ferromagnetic). One-point and two-point calibration to increase measuring
accuracy. Min./max./avg. display.
Note:
Replacement battery: (Order No. 9041 0023,
Ç
9/12).
Order
No.
Measurement range
µm
4926
Dimensions
mm
0005
0–1250
202.00
110 x 50 x 23
(W465)
Layer thickness measuring instrument CoatingTest-Master
m
Measuring and testing equipment
873