876 / 1618
5/2
Hand Tools
5
Design:
Die-forged, jaws and anvil inductive-hardened (52–58 HRC),
with extra large anvil and
highly moulded clamping jaws,
which allow for greater clamp depth. Anvil surface suitable for
straightening and compressing work. Front-opening, precise tightening due to adjustable guide
rail, which is protected from contamination by scrapers, with measurement scale.
Order
No.
Jaw
width
mm
5013
5014
Jaw span/
depth
mm
Clamping range
pipes external ∅
inch
Hole
distance/-∅
mm
Anvil
surface
mm
5013 5014
0100
100* 111.50
–
125/ 68 –
–
92/11.5 65 x 60
0120
120 131.00 145.00
150/ 83 – 3/8–2.1/2 113/13.5 72 x 70
0140
140 176.50 193.00
200/ 96 – 3/8–2.1/2 145/15.0 94 x 85
0160
160 221.00 239.00
225/118 – 3/8–3 145/15.0 120 x 105
0180
180 255.50
–
225/118 –
–
145/15.0 120 x 105
(W500)
(W500)
Parallel vice
* Without holder for protective jaws.
5013
5014
5013
With holder for swivelling and interchangeable pipe clamping jaws.
Note:
For swing clamps and replacement pipe rams see (Order No. 5028 and 5029).
5014
With welded pipe-clamping jaws.
Design:
Steel-forged, can be freely adjusted using the set screw.
Application:
To rotate the vice by 360°.
Order
No.
For jaw width
mm
5021
0100
100
39.40
0120
120
44.60
0140
140
49.70
0160
160
54.20
0180
180
56.20
(W500)
Turntable
Design:
Steel-forged.
Application:
To affix to workbenches, no drilling required.
Order
No.
For jaw width
mm
5018
0100
100
54.00
0120
120
54.00
(W500)
Clamp screw
Design:
Rotates 360°.
Order
No.
For jaw width
mm
5031
5032
5035
0100
100
221.50
–
–
0120
120
221.50
197.00
400.50
0140
140
221.50
197.00
–
0160
160
221.50
197.00
–
0180
180
221.50
–
–
(W500)
(W500)
(W500)
Height adjuster
5031
Height adjustment
up to max. 240 mm, automatic
by means of gas spring.
5032
Height adjustment
up to max. 240 mm, mechanical
by means of spindle.
5035
Height adjustment
up to max. 200 mm, foldable
for space saving storage under
the work bench. Supplied without vice.
5031 + 5032
5035
Vices
876