10 / 12
Contents:
- 4x 4637031150 test connection M 22x1.5
- 4x 4637031200 test connection M 16x1.5
- 4x 8930220002 screw plug with O-ring M 12x1.5
- 4x 8930220144 screw plug with O-ring M 16x1.5
- 4x 8930220154 screw plug with O-ring M 22x1.5
- 8x 8931040644 threaded sleeve M 16x1.5
- 3x 8931042962 bulkhead coupling
- 3x 8931042972 bulkhead coupling
- 4x 8931291912 male stud coupling
- 6x 8931291922 male stud coupling
- 4x 8931291932 male stud coupling
- 4x 8934010152 90° elbow with quick connection
- 4x 8934017974 45° elbow with quick connection
- 2x 8934018184 F-piece with quick connection
- 4x 8935011944 L-piece with quick connection
- 4x 8935011964 T-piece with quick connection
- 6x 8938000012 straight screw-in connector
- 6x 8938000022 straight screw-in connector
- 4x 8938000042 straight screw-in connector
- 8x 8938000072 straight screw-in connector
- 6x 8938000082 straight screw-in connector
Fittings Case
This range of plastic push-in fittings provide a secure joint without the use of any tools making
them quick and easy to fit. They can be used on nylon, plastic, calibrated copper or Bundy
Tubes to carry air, water and many other liquids, except acids
but not suitable for fuel.
We
recommend the use of tube supports with nylon or plastic tubing.
We do not advise the use of
plastic push-in fittings on vehicle brake lines.
Maximum working pressure 10 bar. Minimum
burst pressure 25 bar. Temp: -0 to +60 C
Straight Connector
Tube OD Part Number
6mm
PIF003
8mm
PIF004
10mm
PIF006
Elbow Connector
Tube OD Part Number
6mm
PIF013
8mm
PIF014
10mm
PIF016
Equal Tee Connector
Tube OD Part Number
6mm
PIF023
8mm
PIF024
10mm
PIF026
Plastic Push-In Fittings