Wire
Expo
2014
6 – 7 May
May 2014
48
➣➢➣
standards regarding raw materials, density
and surface nish with each nished part
subjected to two separate levels of end
control. Customers can choose from over
2,000 drawings for standard machines like
Nieho , SAMP, Herborn, Henrich or Syncro.
As a specialist for ceramic wear parts the
company also o ers a wide selection of
standard ceramics like anged eyelets,
ceramic rods, tubes and bow guides in a
variety of qualities and surface nishes.
Pulleys and sheaves are available in
a choice of materials ranging from
aluminium or steel coated with ceramic
or tungsten carbide to solid ceramic or
composites with metal or plastic anges
and solid ceramic inserts as well as plastic
materials.
In addition to an extensive inventory
Cemanco o ers customers assistance with
individual solutions. Custom parts can be
provided with short turn around times
even in smaller quantities.
The company o ers KMK spooling
traverses that are known for their cost
e ciency, longevity and precision. These
mechanical rolling ring drives are easy to
maintain and have been the bench mark
for take-up traverses for many years.
Recently KMK added a dual, laser-guided,
self-adjusting
traverse
system
that
automatically optimises winding results
for a variety of spool types.
The system has been designed as a cost
e ective step towards automation and
rationalisation of the spooling process
providing
consistently
high
quality
winding results.
Roller guides for wire and cable and
wire straighteners complete Cemanco’s
product programme. Guides are available
in many standard sizes from stock or
as individual solutions, with standard
hardened and chrome-coated rollers
or with special coatings like ceramic or
tungsten carbide.
Straighteners come with standard quick
opening levers and cover material
diameters from 0.02" to 1.6", either with
V-grooved rollers or custom radius
grooved rollers.
Cemanco – USA
Website
:
Clinton Instruments
Booth 105
Clinton Instruments will introduce a
new addition to the ST-CAL calibration
system, the Sensitivity Module, SM. This
equipment will check the spark tester’s
fault detection sensitivity and will assure
compliance with EN50356 (IEC/CEI 62230).
The system utilises a rotating spark
gap that controls arc duration and gap
distance. When the test is initiated, the
SM will produce a speci c number of
controlled faults, which the spark tester
must correctly identify to meet the norm.
The sensitivity module will work with high
frequency, power mains frequency and
DC spark testers from any manufacturer.
The SM is compact and portable making it
easy to test units while they are installed in
the factory.
The operator simply selects the type of
unit to be checked and will then have
visual con rmation of the detection
current and number of faults produced via
a digital display on the front panel.
Once the procedure is started the SM will
complete the speci ed number of faults
without additional operator input.
The SM is o ered as an accessory to
the ST-CAL voltage calibration unit,
which allows voltage calibration of most
common spark test units including AC,
both mains and high frequency, as well as
DC equipment. With the ST-CAL system,
spark test voltages up to 30KV AC and
40KV DC can be calibrated easily.
▲
Quality is the name of the game for Cemanco
▲
The ST-CAL calibration systemwill be on display
