23 / 24
23
Over 190 Branches Nationwide
0845 603 3636
Rear Bush Installer – VAG
59.95
LAS4188
•
This tool is essential for replacing the bonded rubber plastic
rear axle mounting bushes fitted to VAG vehicles, without
removing the rear axle assembly from the vehicle
• It’s thrust bearing allows the bush to be fitted quickly
and easily without causing damage
• The drive screw and nut should be lubricated before
and after every use
• Applications: Primarily for use with Audi A3,
Volkswagen Golf IV, Bora 1.4 1.6 1.8 2.0 and 1.9D (01-03)
Suspension Bush
Remover/Installer – VAG
119.95
LAS4748
• This bush removal tool is designed for the rear bush on
the front wishbone (Console bush)
• Applications: Volkswagen Polo, Fox, Seat Cordoba, Seat
Cordoba, Skoda Fabia - All 02-07 Seat Ibiza 02 onwards
after Chassis 6K-2-000 001)
Rear Suspension Upper
Bush Tool
£69.95
LAS5978
• Application: Range Rover L322
2003-2012, Discovery 3/4,
Range Rover Sport
• The Lower Hub Bush Tool
(LAS5077) and the Upper Hub
Bush Tool (LAS5978) have been
developed to allow the technician
to remove and refit these rear
suspension bushes with the minimum
of dismantling required.
Rear Suspension Lower Hub
Bush Tool
£89.95
LAS5977
• Being able to perform the task on the vehicle saves considerable time over the more traditional use
of a workshop press and the requirement that the hub be completely removed.