39 / 97
2 - 9
CANBL_0112
TMPC Meter Stack Modules
A. Barrier
Meter socket and tenant main
breaker/wireway sections are
separated by a solid metal barrier
to guard unMetered bus against
power theft.
B. Tenant Breaker
Reliable busbar-to-busbar
connection. 200 ampere modules
accept bolt-on breakers (not Sal)
60-200 amperes. 125 ampere
modules accept 15-125 ampere
plug-on breakers.
C. Factory Phase Balanced
All Meter centres are factory phase
balanced for ease and speed of
installation.
D. Neutral Assembly
A convenient termination for neutral
conductors is in the wireway of
each module.
E. Enclosed Horizontal Bus
Added security because a non-
removable barrier exercises 800
ampere horizontal bus passing
through tenant breaker section on
5 Jaw design.
F. Equipment Ground Bar
Factory installed in side gutter, a
standard feature that’s movable to
the top or bottom gutter.
G. Continuous Ground
A convenient lay-in lug is attached
to the back of all cells. No longer do
you need to purchase ground bar
kits. Just remove knockouts and run
your ground cable from cell to cell.
H. Raintight Cap
Shipped on all TMPC Meter modules.
Enclosure type 3R rainproof.
I. Knockouts
Tangential in top and bottom,
concentric in removable
backwall plate
J. Superior Finish
Rust inhibiting phosphate primer
and grey baked enamel is standard.
All outdoor enclosures are of
galvanized steel construction
K. Meter Socket
Our unique Meter socket base is
installed without any fasteners
reducing chances for hot spots,
easily replaceable, and improves
connection to vertical bus.
L. Bus Connection
Mains and modules slip together
quickly, smoothly with front-
accessible captive bolts securing the
juncture without removing socket
interiors or bus access plate. No
additional Bus Links required.
Main bus joint bolts torque to
25 foot pounds.
M. Separate Wireway Cover
Separate covers allow easy access
to tenant breaker and wireway
section, permit work on breakers
or in wireway without disturbing
Meters or Meter covers (not shown).
N. Vertical Busbar
One-piece vertical busbar removes
most of the standard electrical
joints to the Meter socket.
Eliminating any chance of “hot
spots” from multiple connection
points.
O. Horizontal Mounting Rail
To speed up and simplify
installations, a two piece Mounting
Rail is included with each Meter
stack. Swing away feet located at
the top and bottom of structure can
be utilized for wall mounting
(not shown).
P. Padlock HASP
Included for additional security
when required (not shown).