TPT September 2011

94 / 199

92 September 2011 ›
Technology Update
Tungsten carbide
insert for outside
tube scarfing
HSS-DMo5 saw blades
& friction circular
saw blades
CON.T.R.A.S.T.
Impeder core for
high frequency
welding of tubes
Fiberglass pipes
for impeder
core
CON.T.R.A.S.T.
30026 PORTOGRUARO - Italy - Via Umbria, 15
Tel. ++39.0421.271699 Fax ++39.0421.770571
FOUR rolls plate bending machine 4HEL
series with computerised numerical control
model PGS-ULTRA are provided with all
the accessories to make the machine
able to combine high accuracy and speed
of execution of the workpiece (even with
complex shapes).
The performances guaranteed by the
manufacturer are obtainable for several
technical reasons.
Rectilinear guides: the frame is designed
in order to have strong guides where the
rolls supports slide during movements. It is
high technology, and the results produce a
high quality of pre-bending operations.
MCS system: the multi-bearing system
is a guarantee for reliability and precision
of the bending roll. Each roll is supported
by four independent bearings, which allow
the distribution of loads and the alignment
of bending axis.
EPS system: the introduction of electronics
into the rolls parallelism is the confirmation of
the continuous research towards accuracy
and repeatability of performances. The rolls
movement is controlled by an electronic unit
to assure the perfect synchronism of the
extremities and the absolute precision of
positioning of the roll.
On the four rolls bending machines
Faccin is proud to introduce a software
with graphic interface: the PGS-ULTRA
– this is the further advancement of
the automation program for bending
systems created by the company’s
electronic engineers years ago.
The goal is always the same: the policy
is to make the diagnostics and maintenance
always easier, fast and therefore less
expensive. With the Faccin CNC, even
an operator without any experience, just
following the instructions on the screen,
is able in a short time to bend cylinders,
ovals and open shapes with variable radii.
Faccin Srl – Italy
Email:
Website:
Four rolls plate bending machines
HAVING started flux cored wire production
in 2009, Gedik welding has been widening
its product range via R&D restructuring that
includes butt and seamless flux cored wire
production technologies. The advantages
of flux cored wire are high deposition rate,
smoothness seam, easiest functionality in
every position and less distortion and stress
as compared to shielded metal arc welding.
Ever-changing and improving industrial
applications create the demand for flux cored
wires for various applications.
Gedik – Turkey
Website:
Flux cored wires product range