WCA September 2012

114 / 136

wire China 2012 – Shanghai New International Expo Centre 25th-28th September 112
wire China 2012
Wire Technologies WITechs.
3 WIRE COATING
HSBE 3201
wire cleaning and coating machine
for liquid lubricant carrier
In-line cleaning with liquid.
carrier-coating with anorganic salt
mixture instead of pure borax.
coating and drying
at infeed-speed up to 4m/s.
extensive control
and monitoring panel
for a safe production process.
25.-28. Sept. 2012
booth W1 E38
KJM GmbH
Stand/展台 .............................W1F35
KJM will be presenting its new slip free
fine wire drawing machine where each
draw is single driven and controlled by
torque.
This drawing principle prevents the
wire surface from damage and saves
energy. The drawing dies and the
pulleys have an extended lifetime,
and the single drive system allows
updating of the die condition for the
machine operator.
Every elongation can be different
from the others, and the machine
itself regulates this. The pay off is
fully controlled by the machine too
giving a reduced production cost than
traditional wire drawing machines.
The interface is user friendly and
gives all necessary information to the
operator, while a diameter and surface
defect checking system is available as
an option.
The machine can reach a speed up to
35m/s and the final wire diameter can
be smaller than 20μm.
KJM GmbH – Germany
Website:
Maillefer Extrusion
Stand/展台 .............................W1F62
Maillefer’s local Shanghai team, led by
Mr Brown Wu, will be pleased to see
customers at booth W1F62.
Mr Brown said: “We are proud to
be considered the market leader
of extrusion technology in China
especially in areas like CV lines. Our
technology solutions combined with
top service are designed to make
customers successful within their
markets.”
Maillefer maintains a long tradition of
offering complete extrusion systems
for energy cable, fibre optic cable,
telecom cable and tube manufacturing
systems within China.
Maillefer SA – Switzerland
Website:
Medek & Schörner
Stand/展台 ............................ W1D49
Medek & Schörner will be presenting
the following state-of-the-art cable
marking machines in Shanghai:
Cable marking machines:
• High quality gravure printers (LAN
cables, control cables, etc) for
speeds up to 1,200m/min
• Water misting unit for the
application of fine water dust
for pre-cooling of the hot wire
immediately after the extruder
• Embossing metre markers/hot
foil sequential metre markers
for highest accuracy of length
measurement (power cables,
telecommunication cables, optical
fibre cables)
• High performance ring markers
for marking telephone wires,
switchboard wires, automotive
cables, LAN cables
• Video system for monitoring the
print quality of fast-running cable
printing machines, eg allowing
real-time inspection for bad quality
and/or missing prints
• Laser marking system for cables
Optical fibre coating systems:
• Top speed optical fibre processing
systems
• Optical fibre colour coding up to
3,000m/min
• Ring marking of optical fibres
• Tight buffering up to 1,300m/min
• Fibre ribbon production with
excellent ribbon planarity and for
speeds up to 1,000m/min
• CFU production of compact fibre
units
Copper wire insulation with UV
varnishes (enamelled wire):
• Manufacture of dimension-
sensitive precision micro flexible
flat cables (FFC) using UV resins
As the only company operating
in this sector, Medek & Schörner
covers virtually the entire spectrum
of machines for marking cables and
coding optical fibres; in particular for
power, telecom and data cables.
Medek & Schörner GmbH – Austria
Website:
❍ State-of-the-art from Medek & Schörner