EoW March 2008

114 / 240

112 EuroWire – March 2008
wire
➣➢➣
31 March-04 April
carbon steel wires and cables and special
stranders for flat copper wires. Its ‘MegaLogos’
high carbon steel drawing machine, charac-
terised by an ergonomic horizontal 1,270mm
diameter capstan, really is a machine for
the future.
Continuus Properzi – Italy
Fax: +39 02 58 310482
Email :
Website:
Coremo Ocmea manufactures a wide range
of brakes and clutches which are used
extensively in the wire and cable industry
worldwide.
Products in Düsseldorf will include caliper
disc brakes, low inertia brakes and clutches,
radial drum brakes and air cooled brakes,
including the new EL caliper which allows
side mounting of the brake without additional
mounting brackets on big wire stranders and
cable laying-up machines.
Coremo Ocmea Srl – Italy
Fax: +39 02 4881940
Email :
Website:
DCM Industries Inc has again led the way in
developing test solutions for the LAN cable
industry.
The Alien Crosstalk option to the DCM model
CMS-2XLD cable measuring system enables
cable producers to accurately test production
cables according to the new Augmented
CAT 6 cabling standards.
As a result of this innovation, DCM has
received new CMS-2XLD orders from China,
Korea, Japan, Taiwan and the United States.
DCM Industries, Inc – USA
Fax: +1 510 670 7212
Email:
Website:
Decalub will be highlighting its DCCD process
and equipment for acid-free steel rod cleaning
and in-line dry preparation at virtually zero
energy consumption in applications including
spring wire, high-tensile rope wire, bead wire,
PC strand wire, CO2 welding wire, Al clad wire,
plating wire and collated nail wire.
Visitors will be able to gain information on the
following items: Acid-free rod cleaning; in-line
dry preparation and wire full film lubrication
(physical separation at wire/die interface),
offer a total saving of 50-64% in production of
H/C wire, enabling 5.5mm diameter 0.85%C
bare rod to be drawn directly with an output
of 2.2 ton/hour – by DCCD system.
Lubricant viscosity control (LVC)
revolutionises wire lubrication and enables
drawing at virtually no speed limitation. LVC
is a unique dry coating process performing
a hard lubricant coat for H/C spring wire and
a light water soluble coat for plating wire,
enabling ‘frictionless’ drawing with die wear
of 0.20micron/ton of wire drawn.
Pre-coating chemicals are completely
eliminated for all H/C and L/C applications
including 0.88%C mechanically descaled bare
rod. Spring wire is drawn at 18ms (3,600ft/
min) – by LVC/PDH system
Wire cleaning: Drawn wire in smooth bright
finish for ‘plating’ quality, in-line, at 12ms
(2,400ft/min). Hermetically sealed ‘zero
emission’ system, operating with a wide
variety of environmentally friendly cleaning
mediums containing the new rust preventive
additives, supplies clean and polished wire of
reflective appearance – by PWC system
Coremo Ocmea Srl
9 F64
DCM Industries Inc
09 F05-04
Decalub
10 E72
➣➢➣