EoW March 2008

206 / 240

204 EuroWire – March 2008
wire
31 March-04 April
Wyrepak will display its line of rotating cap
and brush assemblies designed to pay off wire
at line speeds up to 3,000 feet per minute.
If more tension is needed, the line of manual
and electronic tension capstans can be added.
Also featured will be the company’s expanded
line of guide pulleys.
Wyrepak Industries Inc – USA
Fax: +1 860 632 5775
Email :
Website:
The VEM-15/30 hand feed cold former that
will be demonstrated extruding the ends
of pre-cut steel bars is part of a line of cold
formers for small production batches with
one or two stations.
The operator feeds the bar into the machine
until reaching a positive stop when the
grippers close on the bar and the stopper
retracts.
The machine heads or extrudes the part and
the grippers open. VEM models are available
with a heading force of 15 tons to 150 tons and
strokes up to 200mm.
Also on display will be the fully automatic M-
24 (1") u-bolt machine, working from wire coil,
model VAS-35-BBQ, with the new adjustable
bending die. The thread range is from M-12
to M-24 in mild steel or stainless steel, giving
production rates of 70 bent bolts and 140
straight studs per minute.
The VAS-35-DBQ is equipped with hydraulic
clamping of the threading dies and a process
control system that also controls the cut-
off length. The machine is equipped with a
hand magazine. A planetary dual-spindle
thread roller with a closed structure, model
VA-20/20-ESS, for straightening and thread
rolling of hi-tensile fasteners performs two
rolling operations, one after the other, and
can be used for straightening and threading
or dual threading of fasteners. The machine
is equipped with a ‘controlled introduction’
system, for rolling lap-free threads on any
material hardness. Other features include
hydraulic clamping of the thread rolling dies
and quick set-up features. Thread range up to
M-16. Production speed up to 640 PPM.
Chamfer cutting machine, model VCM,
demo unit will show the new Videx chamfer
machine capacity and flexibility. Videx will
demonstrate a dual spindle chamfer and
turn machine which is servo controlled and
operated.
Videx Ltd – Israel
Fax: +972 3 536 4802
Email:
Website:
YieldManagementCorporation,Massachusetts,
USA, has introduced a new spool run out
detector for tubular stranding and planetary
cable machines. The new model optically
monitors individual spool rotation and can
initiate a machine stop within 8 rotations of the
barrel after a spool has stopped rotating.
The new model detects both empty spools
and broken wire and can significantly re-
duced finished goods scrap while increasing
productivity. The system can be expanded to
accommodate any number of spools.
Yield Management Corporation – USA
Fax: +1 413 283 7778
Email:
Website:
Zumbach will present many new develop-
ments and products.
Sensors: the advanced ODEX® 10
concentricity and diameter gauge for
wire extrusion is an extremely accurate
and advanced sensor, insensitive to
environmental conditions. A fully non-
contact, based on magnetic and laser
technology
New laser based diameter gauges for very
big cables and profiles
3-axis laser diameter gauges with
incorporated fault detection
Ethernet TCP/IP enabled diameter gauges
for direct networking without the need
for external processors
New ultrasonic scanners of the novel
UMAC® for wall thickness measurement
provide quick and easy adaptation to cable
diameters and space-saving integration
Data acquisition, processing and display
units (processors)
A full programme of USYS processors,
ranging from the low-cost basic model up
to the high-end multi-sensor processor/
controller
All USYS processors are extremely user-
friendly, safe, stable and flexible for
extension and upgrading
Complete measuring and control systems,
including new systems for full process
monitoring and control will be shown,
such as: Rayex, the new line of x-ray wall
thickness eccentricity systems for CV lines.
The main new features are: very economic
pricing, advanced hard and software with
easy operation and powerful control
functions and data acquisition
Wallmaster, wall thickness and eccentri-
city systems for cable jackets and diacal
option for fully automatic calibration and
control
Cellmaster®, Jacketmaster and Multiline
systems for extrusion and wire-drawing
based on the new USYS line
Zumbach Electronic AG – Switzerland
Fax: +41 32 356 0430
Email:
Website:
•
•
•
•
•
•
•
•
•
•
•
Wyrepak Industries Inc
09 E36
Videx Machinery Ltd
13 A65
Variety of the numerous successfully operating
ODEX® measuring system
▲
The VA20/20-ESS for thread rolling of hi-tensile
fasteners
▲
Yield Management
Corporation
9 D14-04
Zumbach Electronic AG
11 D43