Technology News
www.read-tpt.com74
S
eptember
2013
IMS Messsysteme GmbH
Dieselstraße 55
|
42579 Heiligenhaus
|
Germany
|
phone: +49 2056 975-0, fax: -140
info@ims-gmbh.de|
www.ims-gmbh.deCompetence in tube measurement
Improve your
product quality!
IMS measuring systems
are designed for online,
non-contact operation in
the measurement of:
• single wall thickness
• mean wall thickness
• eccentricity
• inside profile
• thick ends
• diameter
• ovality
• outside profile
• length
• temperature
Your measurement
task is our
specialisation!
Expanded software capability
TEZET Technik AG has extended
its TeZetCAD software to include
laser scanning for geometric parts on
tubes and in relation to tubes. The
new ‘geometric parts’ module runs on
Windows XP and Windows 7.
If users have measured geometric
parts with other software in the past,
they can now import the files and
drawings into TeZetCAD via the TeZet
interfaces IGES, STL or STEP, and
manipulate them according to the tube
specification, for instance meshes or
point clouds.
These TeZetCAD interfaces are
programmed specifically for tubes and
cannot be used for ‘only geometric
parts’ software. Instead of selecting
points, using the lasso or smoothing
the measured parts, TeZetCAD
measures virtually with the mouse with
the TeZetCAD function ‘check points on
object against Master-IGES’.
Another practical new function that
could help other departments that do not
have access to the measuring device,
but nevertheless are dependent on the
data, is the ‘measure virtual’ function:
the mouse can rollover the drawing on
the screen to each xyz point, and it is
possible to turn and rotate the part that
should be measured.
TeZetCAD now has a status of
‘all-in-one’ with its specialised tube
software, due to the integration of the
measurement and manipulation of
geometric parts that are in relation to
tubes. This new function was created for
the TeZetCAD software and corresponds
with relevant tube data.
TeZet Technik AG
– Switzerland
Fax: +41 56 2492878
Website:
www.tezet.com