TPT May 2007

83 / 164

81
May/June 2007
›››
FRIEDRICH PETIG GMBH
Rhenaniastraße 39
D-41516 Grevenbroich
Tel. +49 (2181) 78 58
Fax +49 (2181) 73108
Vertretung
gesucht
Tube punching WITHOUT HOLE DEFORMATION
Visitors to the ITA stand will also find
information about the ITA’s technical
conferences such as Tube Ukraine
International 2007 ,
titled ‘Modern Production Trends for Tubes &
Pipes – Welded, Seamless & Non-Ferrous’,
which will be held in Dnepropetrovsk,
24-26 September 2007.
Other events are scheduled in Nagoya
), Japan in June and
Bangkok in October 2007.
ITA members will benefit from various
facilities at Tube Russia 2007, including
telephone and fax services, Internet and
email point, meeting area and interpreter
services.
Website:
Friedr Krollmann is a manufacturer of
pointing machines and handling equipment
of all type and sizes for wire, bars, rods,
sections and tubes.
The company’s production programme
covers roll pointing machines, threading
and pointing machines, point milling
machines, swaging machines, tube pointing
machines, chamfering equipment, pay-off
and straightening devices.
In addition, the company provides a range
of feeding and charging devices, loading
systems, cutting and sawing units, scrap
bundling machines, and special purpose
machines.
Website:
LAP will present its redesigned RDMS
software for contour measurements of long
products. The new software responds to the
growing trend of integrating RDMS systems
deeper into the production processes –
even as cross-plant configurations.
Due to a compact design and the fact that
they dispense with movable sensors, RDMS
systems have become established as reliable
technology for inline contour measurements
of tube, bar and wire rod. They are currently
an indispensable element in long product
rolling, with over 100 systems having been
installed in rolling mills worldwide.
The new software supports the integration
of contour measurements into process
control and facilitates their increasing use
within networked systems. The software
has also been further enhanced in terms of
user friendliness.
All screens can now be configured for
each individual user so that only relevant
data is displayed. For examplr, rolling mill
operators may wish to display the results
of contour measurements as circle or line
diagrams. Quality assurance personnel may
need more comprehensive information –
possibly from various production steps – as
well as statistics for evaluation purposes.
Data from several RDMS systems can be
easily interlinked. Thus it is possible to
view the contours of tubes upstream and
downstream of individual production steps
on the same screen and instantly recognise
the effect of a particular process step on the
contour. Furthermore, data from different
process steps can be compared easily.
With the new screen design, LAP is moving
away from pull-down menus towards
touch screens that enable intuitive HMI
configuration, giving special importance to
ergonomics and user friendliness.
LAP’s long products range is completed by
another new development, the RDMS-40 for
tube, bar and wire rod in diameters below
40mm rounds. It now offers solutions for all
diameters up to 500mm.
At Tube Russia, LAP will also showcase
a wide range of systems for inline
measurements of geometric dimensions
at all production stages, from billet or slab
casting through to the finished coil or sheet.
Website:
Friedr Krollmann GmbH & Co
Germany Stand 1-C29
› Friedr Krollmann produces a range of machines
for wire, bars, rods and tubes
LAP Laser GmbH
Germany Stand FO-F07