2014 Locke Supply Co.

521 / 1070

ATT STRAIGHT THRU
START COLLAR
Locke#
L1349 4" ATT Start Collar less Damper, 26
Gauge
L1348 5" ATT Start Collar less Damper, 26
Gauge
L1350 6" ATT Start Collar less Damper, 26
Gauge
L1351 7" ATT Start Collar less Damper, 26
Gauge
L1352 8" ATT Start Collar less Damper, 26
Gauge
L1353 9" ATT Start Collar less Damper, 26
Gauge
L1354 10" ATT Start Collar less Damper,
26 Gauge
L1355 12" ATT Start Collar less Damper,
26 Gauge
L1356 14" ATT Start Collar less Damper,
26 Gauge
L1378 16" ATT Start Collar less Damper,
26 Gauge
L1379 18" ATT Start Collar less Damper,
26 Gauge
L1380 20" ATT Start Collar less Damper,
26 Gauge
ATD START COLLAR WITH
DAMPER
Locke#
L1357 6" ATD Start Collar with Damper, 26
Gauge
L1358 7" ATD Start Collar with Damper, 26
Gauge
L1359 8" ATD Start Collar with Damper, 26
Gauge
L1360 9" ATD Start Collar with Damper, 26
Gauge
L1361 10" ATD Start Collar with Damper,
26 Gauge
L1362 12" ATD Start Collar with Damper,
26 Gauge
L1363 14" ATD Start Collar with Damper,
26 Gauge
DAMPERS ONLy-
COMPLETE WITH ALL
HARDWARE ASSEMBLED
Locke#
L1381 5" Damper with Hardware, 26
Gauge
L1371 6" Damper with Hardware, 26
Gauge
L1372 7" Damper with Hardware, 26
Gauge
L1373 8" Damper with Hardware, 26
Gauge
L1374 9" Damper with Hardware, 26
GaugeL137510" Damper with
Hardware, 26 GaugeL137612"
Damper with Hardware, 26 Gauge
L1377 14" Damper with Hardware, 26
Gauge
"AIR-TITE" TAKE OFFS
All "Air Tite" take offs have a neoprene gasket
with an adhesive backing for easy install. The
backing is protected with paper for storage &
handling to keep dust from the adhesive.
When ready to install "Air Tite" take offs,
simply peel protective paper away from unit &
apply unit to plenum. Once desired position is
located, press firmly to sure a good seal.
After take off has been sealed to plenum,
secure with sheet metal screws. This will
assure air tight seal & give the needed support
for the duct work. On the duct board longer
screws & back plates should be used to
strengthen duct board.
TAKE OFFS & DAMPERS
L2428
AT/SD START COLLAR
26 GAUGE
Locke#
L1364 6" AT/SD Start Collar with Damper &
Scoop
L1365 7" AT/SD Start Collar with Damper &
Scoop
L1366 8" AT/SD Start Collar with Damper &
Scoop
L1367 9" AT/SD Start Collar with Damper &
Scoop
L1368 10" AT/SD Start Collar with Damper
& Scoop
L1369 12" AT/SD Start Collar with Damper
& Scoop
L1370 14" AT/SD Start Collar with Damper
& Scoop
SADDLE TyPE TAKE OFF
WITH GASKET, ROUND
PIPE APPLICATION
Locke#
L2420 4" Rnd CATT; 26 Gauge Start Collar
less Damper
L2421 5" Rnd CATT; 26 Gauge Start Collar
less Damper
L2422 6" Rnd CATT; 26 Gauge Start Collar
less Damper
L2423 7" Rnd CATT; 26 Gauge Start Collar
less Damper
L2424 8" Rnd CATT; 26 Gauge Start Collar
less Damper
L2425 9" Rnd CATT; 26 Gauge Start Collar
less Damper
L2426 10" Rnd CATT; 26 Gauge Start
Collar less Damper
L2427 12" Rnd CATT; 26 Gauge Start
Collar less Damper
ATT RECTANGULAR TO
ROUND BOX
Locke#
L2428 14"x14"x12" Rect. to Rnd Ceiling
Box, 30ga.
BLACK JACK
NON-FIBERED COATING
FOR DUCT WORK
Locke#
M0732 1 Gal. Non-fibered Roof Coating
Credit: 405-631-9756 521
L
|
HVAC