975 / 1070
Credit: 405-631-9756
975
www.lockesupply.comT
|
TOOLS
DUCT STRETCHER
The low profile, straight body is designed to go
anywhere, even in the tightest quarters.
Locke#
T1202
DS1 Duct Stretcher
DUCT STRETCHER
Same features as the DS1 plus offset handle
to eliminate knuckle contact.
Locke#
T1203
DS2 Offset Handle Duct
Stretcher
WHEEL NUT SCREWS
Locke#
T1204
DS1 C Wheel Nut Screws for
T1202
and
T1203
SETTING HAMMERS
Full polished finish with polished face and
pein. Faces and peins are beveled. Leather
Handles.
Locke#
T0065
SH3 12" Setting Hammer
POCKET SIZE SHEET
METAL SCRIBE
• Five teeth produce 10 scribing depths.
• Compact scribe stores in pocket, pouch or
tool box.
• Use hang hole or magnet to keep handy
on-the-job.
Scribe commonplace trim lines on galvanized
sheet metal quickly and accurately. Ten
pre-set scribing depths from
8
" to 1". Each
scribing depth size features a dual edged
point to create clean, readable and accurate
score lines parallel to the edge of the metal
sheet. Corrosion resistant finish and etched-
in dimensions are readable for life of tool.
Packaged in a clear vinyl, reusable pouch for
storage in pocket, pouch or tool box.
Locke#
T1282
A40 Pocket Scribe
FOLDING TOOL
3/8" AND 1"
Makes 3/8" folds for drive cleats,
1" bends for joist panning and more.
Locke#
T1233
12F 12" Folding tool
T1234
18F 18" Folding tool
T1231
24F 24" Folding tool
SHEET METAL SCRIBER
Rotate the sciber extension & knob end to
end for depths over 6½". Constructed of rust
resistant nickel plated steel.
Locke#
T1281
A60 Scribes ¼" to 12½" depths
DIVIDERS
T0068
T0069
Accurate and fast adjusting. 2 sizes for circles
up to 36" and 48". Scribes a thin, accurate
line time after time. Expertly heat treated
scratch awl points are easily resharpenable or
replaced. Nickel plated steel body.
Locke#
T0068
18
11" Dividers
T0069
24
13½" Dividers
T2009
RP2 Replacement points for
T0068
and
T0069
SEAMER, HAMMER, FOLDING TOOLS & DUCT STRETCHER