New-Tech Magazine | July 2016 | Digital edition

110 / 126

Components Communication Test&
Measurement
Power
Supply
Electro
Optics&Camera Motion Packaging &
Production
New-Tech Magazine l 110
Microsemi’s 0.04-45GHz
Wideband MMIC Amplifier
family
Wideband 0.04-45GHz Low
PWR Consumption MMA030AA
MMA031AA Excellent
alternative to HMC930! Includes
on chip Power Detector Bare
Chip construction Option to
65GHz MMA034 AA/035/036
STG :לפרטים נוספים
03-7331458 :טל
GUERRILLA-RF - GRF5010
+28.0dBm Power-LNA™
Tuning Range: 0.05 - 6.0GHz 6
GRF5010 is a high linearity PA with
ultra-low noise fig-ure (NF). The
primary tune for this device covers
1.7 to 3.8 GHz and it achieves
outstanding P1dB, IP3 and NF
over the band. The device can
be tuned to deliver out-standing
performance over 0.1 GHz. to 6.0
GHz with fractional bandwidths
>30%. With an 8.0 Volt supply,
the device can deliver broadband
OP1dB values of 28.0 dBm. In
addition to use as a PA or linear
driver, GRF5010 is well suited to
demanding first, second or third
stage LNA applications requiring
high linearity, ruggedness and low
NF.
STG :לפרטים נוספים
03-7331458 :טל
GUERRILLA-RF - GRF2073
Ultra-Low Noise Amplifier
Tuning Range: 3.0 – 6.0 GHz
The GRF2073 is a broadband,
linear, ultra-low noise am-plifier
designed for small cell, wireless
infrastructure and other high
performance RF applications
requiring ultra-low NF, high gain
and linearity.
Configured as a first stage LNA,
linear driver or cascaded gain
block, GRF2073 offers high levels
of reuse both within a design and
across platforms.
GRF2073 is a member of a family
of pin compatible, ul-tra low noise
devices which cover a wide range
of fre-quency bands with industry
leading NF and gain.
STG :לפרטים נוספים
03-7331458 :טל
Teledyne Coax CCR-48K
Series
DC-40 GHz SP3T to SP6T
Switch Normally Open
The CCR-48K/CR-48K is
a broadband, multi-throw,
electromechanical coaxial switch
designed to switch a microwave
signal from a common input to
any of 3, 4, 5, or 6 outputs. The
characteristic impedance is 50
Ohms. The switches are small
using the popular connector
spacing on a 1.062” dia. circle.
Each position has an individual
actuator mechanism allowing
random position selection. This
also gives the minimum switching
time. With the normally open
actuator, all paths are open when
the switch is de-energized.
STG :לפרטים נוספים
03-7331458 :טל
Teledyne Storm’s DuraTest
Cables
DuraTest™: Extra Durable
Everyday Test Assemblies
When you need a general purpose
test assembly that can be counted
on for the long haul and won’t bust
the budget, you need a DuraTest™
assembly.
DuraTest™ combines the proven
toughness of Teledyne Storm cable
Captivated stainless steel
connectors
Proprietary Hard-To-Hurt™
strain relief technology
STG : לפרטים נוספים
03-7331458 : טל