WCA September 2008

43 / 131

news
Wire & Cable ASIA – September/October 2008 41
The possibilities of CNC
wire forming
OMCG CNC benders are available to
form wire, tube and strip or parts for
assembly, in variations to cover low,
medium or high volume up to 18,000
per hour.
CNC allows forming with wire from
1mm to 18mm. The bend head allows
sharp inside radii smaller than any pin
diameter. Parts can have a formed eye
on both ends.
Additional ancillary units allow coining,
cold heading, threading and welding.
With the manipulator, assembly is
possible and limited only by the
imagination of the engineer to create
the work cell.
It is possible to make two parts and then weld them together.
With Easy Program 3D screen animation a program can be
prepared, tested and sent to the CNC machine via a company
network without interfering with existing production.
OMCG SpA – Italy
Email: Website :
Worldwide wire
working machines
The Delisi company manufactures, sells and exports
wire working machines.
Still an independent company, Delisi offers automatic
straightening and cutting machines for smooth and
ribbed wires of diameters from 1mm to 20mm. Delisi
machines are designed for versatility and can be
suited to the customer’s requirements.
Feeding speed is regulated by hand-wheel or an
electronic system. Feeding rolls are never changed;
with the hand-wheel it is easy to select the grooves on
the feeding rolls to suit the diameter. The spinner has
a pre-regulated set of straightening jaws and it is said
to take only a minute to change wire diameter.
An electronic programmer and one or three lines of
pneumatically tiltable arms can be supplied with the
rod collection bed. Different lengths and quantities
can be programmed and collected separately in one
of the lines of tiltable arms without stopping the
machine.
Delisi Srl – Italy
Fax: +39 0882 333236
Email
Website:
Almost any shape is m m
possible with CNC