finish
• All surfaces must be clean, firm and thoroughly dry
before painting
• Apply Plascon Multiseal (WSS 2) by brush or roller and
build up to a thickness of 1mm in 3 coats, allowing 4
hours to dry between coats.
• Finish with a chosen Plascon Nuroof colour
THE PROBLEM
THE SOLUTION
HOW TO FIX
Roofs
Water affected roofs in and around
vulnerable areas, like bolts
clean
apply
finish
• All surfaces must be clean, firm and thoroughly dry before
painting
• Apply Plascon Roofseal (WRS 4), unthinned to primed
surface
• Immediately embed the Plascon Membrane into the wet
coat of Plascon Roofseal (WRS 4) ensuring the membrane
is thoroughly saturated by the coating
• Immediately apply full coat of Plascon Roofseal (WRS 4)
over the membrane
• Allow 48 hours to dry before finishing with a chosen top coat
Roofs
Leaks that require membranous
waterproofing on and around roof
flashing
remove
&
clean
apply
finish
Plascon Roofseal can also be
used on parapets
remove
&
clean
COMMON PROBLEMS & WATERPROOFING / ROOFS