Adhesive Dispensing Ltd

Valve systems

www.adhesivedispensing.co.uk

Rotary table

Part Code

Type

ADL-300

220V AC

ADL-310

110V AC

PneumaƟc Dispenser

Bench top dispenser for adhesives, fluids & gels to circular products under 152mm dia. This rotary table

applies a circular paƩern on areas that are difficult to access. The ƟlƟng Z-axis allows dispensing on an

angle. Fully adjustable rotaƟon speed, circle diameter & dispense Ɵme. Dispense from barrels, mounted

on the Z-axis. The Z-axis Ɵlt is easily adjusted.

Hand operated valve for applying low to medium viscosity fluids as cyanoacrylates, solvents, UV cure,

anaerobic, primer & acƟvators. Maintenance free replaceable tubes. Takes a direct feed of fluid from a

syringe, cartridge or pressure pot.

Man al Pin h Valve

Part Code

WeƩed Parts

TS1201

Polyethylene

Manual Lever Valve

Hand operated diaphragm valves for the applicaƟon of low tomedium viscosity fluids such as cy-

anoacrylates, solvents, inks, UV cure, anaerobic, primers and acƟvators. Takes a direct feed of fluid

from a syringe, cartridge or pressure pot. UHMW/ Teflon for Cyanoacrylates, Delrin for UV cure.

Part Code

WeƩed Parts

TS5623HU

UHMW

TS5623HD

Delrin

TS5623HT

Teflon

Manual Lever Valve

Part Code

WeƩed Parts

ADL-200CAM

Teflon

Hand operated diaphragm disc valve for the applica-

Ɵon of low to medium viscosity fluids such as cyanoacrylates, solvents, inks, UV cure, anaerobic, pri-

mers and acƟvators. Takes a direct feed of fluid from a syringe, cartridge or pressure pot.

Typical ApplicaƟons:

UV cure, Cyanoacrylates, solvents, anaerobics, glues, gels..

Typical ApplicaƟons:

UV cure, Cyanoacrylates, solvents, anaerobics, glues, inks..

Typical ApplicaƟons:

UV cure, Cyanoacrylates, solvents, anaerobics, glues, gels..

Typical ApplicaƟons:

UV cure, Cyanoacrylates, solvents, anaerobics, glues, gels..

Length: 127mm

Width: 34mm

Max Pressure: 60psi

Viscosity: 1-45k cps

Z Travel: 50mm

Speed: 300 RPM

Max Pressure: 100psi

310 x 215 x 85mm

Length: 159mm

Width: 45mm

Max Pressure: 50psi

Viscosity: 1-5k cps

Length: 88mm

Width: 27mm

Max Pressure: 70psi

Viscosity: 1-50k cps