EuroWire Sept 2015

47 / 108

News
Technology
September 2015 45
Renova has introduced the new powerful
and reliable Moviroll roll pushers –
pneumatic and battery driven. Renova’s
Moviroll systems allow the operator to
effortlessly manoeuvre both large and
small cylindrical loads on a flat surface and
then place them on the roll stand shuttle
cart.
Compact, heavy-duty, fast and with low
or no maintenance requirements, the new
Moviroll roll pushers allow the movement
of the load in a continuous and regular
way and are suitable for handling wire and
cable rolls, corrugated, paper and tissue
rolls in a simple and safe manner.
All Moviroll models are designed and
made in Italy.
Pneumatic model: The MR pneumatic
Moviroll uses the power of a pneumatic
gear motor that is powered by pressurised
and lubricated air at 6 bar (90 psi).
Two models, each with two different
handle configurations (straight handle
or curved ‘S’ handle) comprise the range:
• Models MR100/MR100 S have a thrust
force of 10,000kg (22,000lb) and a lift
force of 2,500kg (5,500lb)
• Models MR200/MR200 S have an
increased thrust force of 20,000kg
(44,000lb) and a lift force of 5,000kg
(11,000lb)
Battery model: The new MRE battery-
powered Moviroll offers the advantage of
free movement without the constraints of
pneumatic connections or electrical cables.
It is equipped with a 24V DC IP 44 sealed
brushed motor powered by a 24V battery
and a sophisticated electronic system that
supervises the operating parameters of
the motor and battery, and intervenes to
safeguard the Moviroll when they exceed
those eligible.
In case of anomaly a flashing LED allows
you to identify the problem and solve it.
The high performance battery is housed in
an 8mm chassis and ensures the operator
to move from 60 to 120 rolls with only
a battery charge. The MRE Moviroll is
provided with a second battery (optional).
The plug and play batteries allow
quick changes of the battery without
interruption during operation. The
intelligent charger autonomously
decides on the duration of the recharge,
depending on the state of the battery
charge.
Great importance has been given to the
system design. The ergonomic handle and
throttle have been designed in such a way
as to simplify the Moviroll handling during
both the forward gear and reverse gear. The
throttle is equipped with a speed command
that allows variable speed to suit any
operator needs. The oversized rear wheels
are designed to easily overcome obstacles
such as holes, chains and shuttle cart.
The battery Moviroll is available in three
models, each with two different handle
configurations (straight handle or curved
‘S’handle).
• Models MRE100/MRE100 S have a
thrust force of 12,000N (26,450lb) and a
lift force of 3,000kg (6,600lb)
• Models MRE200/MRE200 S have a
thrust force of 16,000N (35,300lb) and a
lift force of 4,000kg (8,800lb)
• Models MRE300/MRE300 S have a
thrust force of 20,000N (44,100lb) and a
lift force of 5,000kg (11,000lb)
Renova Srl – Italy
Website:
Pneumatic and battery driven roll pushers