![Show Menu](styles/mobile-menu.png)
![Page Background](./../common/page-substrates/page0130.jpg)
TÜV SÜD Product Service
Home Phases 1-5 Phases 6-1615
Objectives
To define the procedures that are necessary to ensure that the functional safety for the E/E/PE
safety-related systems is appropriate, both during and after the modification and retrofit phase
has taken place
IEC 61508
Part 1 Clauses
7.16.1
7.16.2
IEC 62061
Clause 9 – Modification
This clause specifies the
modification procedure(s) to be
applied when modifying the
SRECS during design,
integration and validation (e.g.
during SRECS installation and
commissioning).
Modification after the SRECS
has been put into operation and
use is not considered by 62061
ISO 13849
Modifications during software
development covered in clause
4.6 – Software safety
requirements.
Modification after the machine
has been put into use is only
briefly mentioned in the
documentation requirements of
clause 11 – Information for use
Overall modification and retrofit