1109 / 1562
6/97
Articles marked ◊ are not held in stock, procurement is effected at short notice.
6
Hand Tools
Design:
Housing made of high-performance aluminium, reaction arm forged from chrome-vanadi-
um steel for safe interception of the counter forces. High precision, single-stage planetary gearbox
for high durability and exact torque transfer. The guaranteed accuracy is better than ± 3 % tole-
rance. Square drive with bore for receiving power wrench inserts with locking pin and rubber ring.
Application:
For controlled tightening of screws and loosening fittings with a torque wrench. Ideal
for bridge, ship, aircraft, railway as well as machine and plant engineering in industry, refineries,
commercial vehicles, automotive engineering and construction sites.
Scope of delivery:
Torque multipliers with integrated reaction arm, calibration certificate, setting
table and sturdy carrying case with foam insert.
Note:
Power screwdriver bits from
Ç
6/78.
Torque multiplier DREMOPLUS ALU
GEDORE torque DREMOPLUS ALU
Benefits:
• slim and lightweight design allows comfortable and safe operation
also in very tight spaces
• repeatability, precise work results
• high load capacity and long life due to the high precision planetary
gearbox with ceramic-PTFE coating
• more than 30 % lighter housing made of high-performance alumini
um compared to a steel case
• every torque multiplier is checked for its torque range and equipped
with an individual factory test certificate
• high quality workmanship – Made in Germany
Choice of the right reaction arm:
Z-form
Offset form for support on adjacent screws, walls, machine parts or
other stable abutments. Ideal where space is limited.
L-Form
Straight shape with adjustable reaction arm. Ideal for screw joints,
provides a larger radius for the support than the Z-form. Can also
be supported at points that are higher than the screw plane, but this
reduces the maximum permissible torque by 20 %.
6252
Overload protection by means of sun gear.
If the drive is overloaded
by excessive forces, the sun gear is damaged and not the entire motor.
After replacing the sun gear, the torque multiplier is ready for use again.
1300
6252
Overload protection by means of shearing square.
If the motor is
overloaded by excessive forces, the output square turns off. The motor
won't be damaged. After replacing the output square drive, the torque
multiplier is ready for use again.
2800 +
2801
6252 1300
Order
No.
Output torque
N•m
6252
Reaction arm
Transmission ratio
Square drive
inch
Output square
inch
maximum
input torque
N•m
Weight
kg
1300
250–1300
1276.00
Z-Form
1:5.0
1/2
3/4
270
1.9
2800
500–2800
2075.00
L-Form
1:5.5
3/4
1
550
3.4
2801
500–2800
1663.00
Z-Form
1:5.5
3/4
1
550
3.9
(522)
6252 2800
Design:
Aluminium housing, with a backstop. High precision of ± 5 %.
Application:
For controlled tightening of screws and loosening fittings with a torque wrench.
Ideal for ship, machine and plant engineering in industry and automotive engineering.
Note:
Power screwdriver bits from
Ç
6/78.
Order
No.
Output torque
N•m
6253
Reaction arm
Transmission ratio
Square drive
inch
Output square
inch
1400
1400
1023.00
◊
Z-Form
1:3.5
3/4
1
1401
1400
1167.00
◊
Z-Form
1:3.5
3/4
1
2801
2800
2008.00
◊
Z-Form
1:11
3/4
1
(529)
Torque multiplier
m
Certificate
Torque-multiplication device
Not all items are available in every country.
1109