1211 / 1562
6/199
Puller
Design:
With two-piece jaws and splay.
Application:
For extracting ball bearings, bearing outer rings and bushings. Also located very
close to the back wall, the bearing is grasped by the excellent tension effect and extracted
quickly. For use with counter support for recessed extractor (Order No. 6923).
Order
No.
Model
6922
For drilling
mm
For counter sup-
port model No.
Length
mm
0012
21-01
38.20
8– 12
22-1
73
0014
21-02
38.20
10– 14
22-1
73
0016
21-1
38.20
12– 16
22-1
72
0019
21-2
38.20
14– 19
22-1
72
0023
21-3
38.20
18– 23
22-1; 22-2
89
0030
21-4
42.00
20– 30
22-1; 22-2
92
0040
21-5
47.30
28– 40
22-1; 22-2
101
0046
21-6
52.60
36– 46
22-2; 22-3
113
0058
21-7
70.80
45– 58
22-2; 22-3
135
0070
21-8
89.30
56– 70
22-2; 22-3
133
0100
21-9
141.50
70–100
22-2; 22-3
166
(562)
Recessed puller
6922
Design:
Space-saving, stable model, with ergonomic shaped handles.
Application:
For use with an recessed extractor (Order No. 6922). For quick removal of ball
bearings. After setting the recessed extractor slide hammer bar screw with a wedge spindle and
slide hammer.
Order
No.
Model
6924
For recessed puller model
Weight
kg
Length
mm
0000
22-0
40.30
21-0 to 21-2
0.5
150
0004
22-0-1
88.30
21-3 to 21-8
1.7
230
(562)
Slide hammer device
6924 0000
6924 0004
Design:
Stable support brace with T handle and one-piece extractor hooks.
Supply of 22-1
and 22-2 with screwed in reducer and 22-3 with coupling nut in this screwed in reducer.
22-1
For recessed extractors 21-0 and 21-02,
with
reducer
For recessed extractors 21-1 and 21-5,
without
reducer.
22-2
For recessed extractors 21-3 and 21-5,
with
reducer.
For recessed extractors 21-6 and 21-8,
without
reducer.
22-3
For recessed extractors 21-6 and 21-8,
with
reducer via connecting nut.
For recessed extractor 21-9,
without
reducer via connecting nut.
Application:
For use with an recessed extractor (Order No. 6922). For connecting to the
recessed extractor, the spindle of the support brace is screwed into the clamping nut of the
recessed extractor.
Order
No.
Model
6923
For recessed puller model
0001
22-1
42.50
21-0 – 21-5
0002
22-2
55.00
21-3 – 21-8
0003
22-3
116.50
21-6 – 21-9
(562)
Counter part for recessed puller
Design:
Supplied in plastic case or in i-Boxx, with foam insert.
Order
No.
Design
6925
Model Set contents
For recessed
puller model
0000
10-piece
in plastic
case
90.50
KS-22-01 1 slide hammer
6 threaded adapters
M3; M4; M5; M6; M8; M10
3 galvanised adapters M10; M12; 15-16G
21-0 to 21-8
0005
18-piece
in i-Boxx
270.50
m
28-A 1 slide hammer
10 threaded adapters M3; M4; M5; M6;
M8; M10; M12; M14; M16; M18
5 recessed extractor
21-00; 21-01 (Order No. 6922 0012);
21-02 (Order No. 6922 0014);
21-1 (Order No. 6922 0016);
21-2 (Order No. 6922 0019)
2 galvanised adapters M10; M12
21-00 to 21-2
(562)
Slide hammer set
6925 0000
6925 0005
Articles marked ◊ are not held in stock, procurement is effected at short notice.
6
Hand Tools
Not all items are available in every country.
1211