1212 / 1562
6/200
Puller
Design:
Supplied in L-Boxx, with operating instructions always visible on the lid.
Application:
For recessed, external and bearing pulling of ∅ 8–48 mm.
Order
No.
Design
6896
Model Set contents
0005
21-piece
633.50
27-A 1 two-armed puller 43-01
1 two-armed puller with side clamp 204-01
1 ball bearing puller 69-A1, suitable for bearings:
6004; 6005; 6006; 6201; 6202; 6203
1 ball bearing puller 69-A2, suitable for bearings:
6008; 6009; 6204; 6205; 6300; 6301; 6302
1 ball bearing puller 69-A3, suitable for bearings:
6010; 6206; 6303; 6304
1 recessed extractor 21-01 E for bearing ∅: 9-12 mm
1 recessed extractor 21-1 E for bearing ∅: 12-16 mm
1 recessed extractor 21-2-E for bearing ∅: 14-19 mm
1 recessed extractor 21-3 E for bearing diameter: 18-23 mm
1 recessed extractor 21-4 E for bearing ∅: 24-34 mm
1 recessed extractor 21-5 E for bearing ∅: 34-48 mm
10 slide hammers with adapter 22-01-G27-A: M3; M4; M5;
M6; M8; M10; M12 and galvanised: M10; M12; 15-16G
(562)
Universal puller set
Design:
Supplied in L-Boxx or metal case, with operating instructions always visible
on the lid.
Application:
For extracting ball bearings, bearings, gears, shoulder bearing inner rings,
deep groove ball bearings as well as extracting tight-fitting ball bearings, bearing outer rings
and sleeves.
Order
No.
Design
6926
Model Set contents
0046
11-piece
in L-Boxx
632.50
24-A 6 recessed pullers (12–46 mm) 21-1 to 21-6
2 counter supports 22-1; 22-2
1 removal chuck for groove ball bearing inner rings 23
1 double-armed battery clamp remover 43-1
1 two-armed puller 20-1
0070
14-piece
in L-Boxx
928.50
24-B 8 recessed pullers (12–70 mm) 21-1 to 21-8
2 counter supports 22-1; 22-2
1 removal chuck for deep groove ball bearing inner rings 23
1 double-armed battery clamp remover 43-1
2 two-armed pullers 20-1; 20-2
0110
15-piece
in metal
case.
1225.00
24-C 7 recessed pullers (12–58 mm) 21-1 to 21-6
1 recessed extractor (65–110 mm) 21-89
3 counter supports 21-1; 22-2; 22-4
1 removal chuck for deep groove ball bearing inner rings 23
1 double-armed battery clamp remover 43-1
2 two-armed pullers 20-1; 20-2
(562)
Ball bearing puller and extractor set
Design:
Supplied in L-Boxx, including 2 partial wheels, lock nuts and spindle, 7 set puller legs
with ball heads, 2 guide rings for better handling of the puller legs as well as 26 different
supporting rings.
Application:
For
damage-free pulling
of deep groove ball bearings, which sit in a housing on
a shaft and must be grasped between the inner and outer ring.
Order
No.
Design
6339
Model
For ball bearings
0005
37-piece
843.00
KS-70-A-K
6000–6012; 6200–6212;
6300–6311; 6403–6408
(562)
Ball bearing puller set
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
6
Hand Tools
1212