380 / 1562
2/134
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
2
Cutting Tools
Saw blade quality:
HCS:
High carbon steel for use in softer materials such as wood,
wood fibre boards and plastics.
Bimetal:
Highly flexible, almost non-breakable combination of HSC
and HSS, long service life. Can be used for hard woods, abrasive
wooden materials, hard plastic, non-ferrous metals and metals.
Tooth design:
Teeth milled, side clearance side set:
Blade with relatively coarse
cut and fast work progress in hard and soft wood, aluminium, plastics
and non-ferrous metals.
Teeth milled, clearance wavy set:
Blade with fine result for straight
cuts in plywood, soft steel, aluminium, non-ferrous metals and plastics.
Teeth ground, side clearance side set:
Blade for clean, fast cuts in wood.
Teeth ground, side clearance lead angle ground:
Blade with
taper ground back for side clearance; for precise, fine and clean
cuts in wood and plastic.
Design:
5 pieces on card.
Suitable for:
Bosch, AEG, Milwaukee, DeWalt, ELU, Festool,
Hitachi, Mafell, Makita, Metabo, Protool.
Order
No.
Bosch No.
2735
2736
Cutting length
mm
Material
Wood
mm
Tooth pitch
mm
Type of tooth
Use
0005
T 101 B
5.80
6.70
74
HCS
3–30
2.7
teeth ground;
side clearance lead
angle ground
For straight, fine cuts, fibre boards,
plastic/epoxy, with plunge tip.
0010
T 301 CD
6.35
7.30
91
HCS
10–65
3
teeth ground;
side clearance lead
angle ground
For straight, fine cuts.
0015
T 101 D
5.80
6.70
74
HCS
10–45 progressive
4–5.2
teeth ground;
side clearance lead
angle ground
For straight, clean cuts, with plunge tip.
0020
T 101 BR
6.90
7.95
74
HCS
3–30
2.5
teeth ground;
side clearance lead
angle ground
For straight, fine cuts, splinter-free sawing
thanks to reverse tooth pattern.
0026
T 144 DP
–
7.30
74
HCS
5–50
4
ground;
side set
For straight, exactly angled cuts, with plunge tip.
0027
T 119 B
–
3.56
67
HCS
2–15 progressive
1.9–2.3
Milled,
wavy set
For soft wood, plywood, chipboard,
wood core plywood, fibre boards.
0028
T 119 BO
–
4.91
56
HCS
2–15
2
Milled,
wavy set
For soft wood, plywood, chipboard,
wood core plywood, fibre boards, spe-
cially designed for curved cuts.
0030
T 344 DP
11.95 13.75
126
HCS
5–100
4
ground;
side set
For thick timber, soft wood, chipboard, wood
core plywood, fibre boards, exactly angled cut.
0035
T 111 C
3.09
3.56
74
HCS
4–50
3
milled;
side set
For soft wood, plywood, chipboard, wood core
plywood, fibre boards, fast cut with plunge tip.
(248)
(247)
Jig saw blades for wood
Continued overleaf
Saw blade quality
Soft wood:
High carbon steel for use in softer materials such as wood, wood
fibre boards and plastics.
HSS:
Fully hardened high-speed steel for use in harder materials
such as metal, aluminium and non-ferrous metals.
Bimetal:
Highly flexible, almost non-breakable combination of HCS and HSS,
long service life. Can be used for hard woods, abrasive wooden mate-
rials, hard plastic, non-ferrous metals and metals.
Carbide-tipped:
The HSC blade is equipped with carbide teeth and is thus suitable
for abrasive materials such as glass-fibre-reinforced plastics,
asbestos cement, hard woods and aerated concrete.
Tooth design:
Teeth milled, side clearance side set:
Blade with relatively coarse cut and fast work progress in hard
and soft wood, aluminium, plastics and non-ferrous metals.
Teeth milled, side clearance wavy set:
Blade with fine result for straight cuts in plywood, soft steel,
aluminium, non-ferrous metals and plastics.
Teeth ground, side clearance side set:
Blade for clean, fast cuts in wood.
Teeth ground, side clearance lead angle ground:
Blade with taper ground back for side clearance; for precise,
fine and clean cuts in wood and plastic.
Tooth pitch:
Small tooth pitch for fine cuts with slower work progress, in hard
and/or thin material such as metals and non-ferrous metals.
Large tooth pitch for coarser cuts coupled with fast work progress
in soft and/or thick material such as wood and plastic.
Application:
Saw blades are subject to high mechanical and thermal loads. For
this reason, the use of specific coolants, e.g. cutting oil (for steel,
metals) or water (for aluminium, INOX, thin sheets), is recommended
in order to extend the wear-resistance of the saw blade.
Jigsaw blades
380