382 / 1562
2/136
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
2
Cutting Tools
Saw blade quality:
Bimetal:
Highly flexible, almost non-breakable combination of HCS and HSS, long service life. Can
be used for hard woods, abrasive wooden materials, hard plastic, non-ferrous metals and metals.
Tooth design:
Teeth milled, side clearance side set:
Blade with relatively coarse cut and fast work progress in
hard and soft wood, aluminium, plastics and non-ferrous metals.
Teeth milled, clearance wavy set:
Blade with fine result for straight cuts in plywood, soft steel,
aluminium, non-ferrous metals and plastics.
Teeth ground, side clearance side set:
Blade for clean, fast cuts in wood.
Teeth ground, side clearance lead angle ground:
Blade with taper ground back for side clearance;
for precise, fine and clean cuts in wood and plastic.
Tooth pitch:
Small tooth pitch for fine cuts with slower work progress, in hard and/or thin material such as
metals and non-ferrous metals.
Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material such
as wood and plastic.
Design:
5 pieces on card.
Suitable for:
Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi, Mafell, Makita, Metabo, Protool.
Order
No.
Bosch No.
2736
Cutting
length
mm
Material
Wood
mm
Tooth pitch
mm
Type of tooth
Use
0006
T 101 BF
12.70
74
Bimetal
3–30
2.7
teeth ground; side clea-
rance lead angle ground
For straight, fine and clean cuts in
coated boards/HPL, plastic/epoxy,
hard wood, laminates, with plunge tip.
0051
T 101 AIF
12.95
77
Bimetal
2–30
1.7
teeth ground; side
clearance lead angle
ground; pointed teeth
For straight, fine and clean cuts in
coated boards/HPL (2–30 mm),
plastic/epoxy (dia. < 30 mm),
hard wood, laminates, with plunge tip.
0052
T 301 CDF
15.55
91
Bimetal
4–65
3
Lead angle ground,
teeth ground
For hard and soft wood,
coated boards/HPL, clean cuts.
0105
T 144 DF
11.20
74
Bimetal
5–50 progressive
4–5.2
ground; side set
For hard and soft wood, all types of
boards, including coated ones, straight,
fast cuts, with plunge tip.
(247)
Jig saw blades for hard woods
Saw blade quality:
Bimetal:
Highly flexible, almost unbreakable combination of HCS and HSS. The area of application
covers hard wood, abrasive wooden materials, hard plastics, non-ferrous metals and metals.
Tooth design:
Teeth milled, side clearance side set:
Blade with relatively coarse cut and fast work progress in
hard and soft wood, aluminium, plastics and non-ferrous metals.
Design:
5 pieces on card
.
Suitable for:
Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi, Mafell, Makita, Metabo, Protool.
Order
No.
Bosch No.
2736
Cutting
length
mm
Material Metal
mm
Wood
mm
Plastic
mm
Tooth
pitch
mm
Type of tooth
Use
0106
T 345 XF
12.70
106 Bimetal
3–10 < 65 3–10 progressi-
ve 2.4–5
milled;
side set
For timber with nails (< 65 mm), aluminium/
plastic pipes + profiles (dia. 3–10 mm),
fast cuts, with plunge tip.
(247)
Jig saw blades for wood and metal
Jigsaw blades
382