758 / 1562
4/30
Digital micrometers
DIN
863
IP 54
DIN
863-1
Absolute
function
RS232
USB
Digimatic
Design:
Measuring faces carbide-tipped. Digit height of LCD 7 mm. Highest measuring
accuracy with simultaneous insensitivity to temperature fluctuations due to the heat protection
plate bracket. Supplied with battery CR 2032, 3 V, in plastic case.
Function:
mm/inch-conversion, zero setting possible in any position, automatic switch-off
after 10 minutes. The display setting is retained as long as the power supply is maintained.
Measuring force max. 10 N.
Note:
Replacement battery
(Order No. 4027 2032,
Ç
4/12).
Data cable Opto RS 232 (Order No. 4025 0005,
Ç
4/12).
Order
No.
Measurement
range mm
4109
4111
Reading
mm
Spindle ∅
mm
Gradient
mm
0001
0– 30
299.00
333.00
0,001
6,5
0,5
0003
25– 50
374.00
419.00
0,001
6,5
0,5
0005
50– 75
429.00
502.00
0,001
6,5
0,5
0007
75–100
488.00
549.00
0,001
6,5
0,5
(495)
(495)
Digital micrometer MICROMASTER capa µ system
Patented
measuring
system
4109
Without data output.
4111
With data output Opto RS 232.
Order
No.
Measurement
range mm
4111
Set consisting of
0030
0–75
1167.00
1 outside micrometer, 0–30 mm (Order No. 4111 0001)
1 outside micrometer, 25–50 mm (Order No. 4111 0003)
1 outside micrometer, 50–75 mm (Order No. 4111 0005)
1 setting gauge, 50 mm
(495)
Digital micrometer set MICROMASTER capa µ system
Design:
Supplied in plastic case.
Design:
Measuring faces carbide tipped, digit height of the LCD 6.5 mm. With measuring
force regulation by means of ratchet stop, clamping lever and thermal hand protection.
Supplied with measurement adjustment from measuring range 25–50 mm and battery
CR 357, 1.5 V, in a plastic case.
Function:
Switch-on and switch-off, mm/inch-conversion, reset (zeroing) possible in any
position, automatic switch-off.
Note:
Replacement battery (Order No. 4027 0357,
Ç
4/12).
Order
No.
Measurement range
mm
4106
Reading
mm
Spindle ∅
mm
Gradient
mm
0025
0– 25
80.80
0.001
6.5
0.5
0050
25– 50
96.40
0.001
6.5
0.5
0075
50– 75
105.50
0.001
6.5
0.5
0100
75–100
115.00
0.001
6.5
0.5
(404)
Digital micrometer
Design:
Measuring faces carbide-tipped, ratchet integrated in measuring drum. With clamping
lever, quick drive and thermal hand protection. Digit height of the LCD 7.5 mm, inductive
measuring system, with variable data output RS 232, USB and Digimatic (DATA Variable).
Supplied with battery CR 2032, 3 V, in plastic case.
Function:
On and automatic off switch, mm/inch switching, automatic switching by means
of turning the drum, key lock set for zero position, re-zeroing after switching deleted (absolute
system), reset (zeroing) possible at each position, ± pre-set function (setting a numerical value).
Note:
Replacement battery (Order No. 4027 2032,
Ç
4/12).
Data cable USB
(Order No. 4025 0003,
Ç
4/11).
Data cable Digimatic (Order No. 4025 0004,
Ç
4/11).
Data cable RS 232 available on request.
Order
No.
Measurement range
mm
4108
Reading
mm
Spindle ∅
mm
Gradient
mm
0025
0– 25
193.00
0.001
6.5
0.635
0050
25– 50
246.50
0.001
6.5
0.635
0075
50– 75
341.50
0.001
6.5
0.635
0100
75–100
393.50
0.001
6.5
0.635
(404)
Digital micrometer
DIN
863
IP 54
SCS
calibration
certificate
opto
RS232
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
4
Measuring
Equipment
758