753 / 1562
4/25
Digital depth gauge calipers
Design:
Made of stainless steel, hardened. Retrofitted for wireless data transfer with transmitter
module TLC TWIN as well as receiver TWIN station. Range between instrument and receiver is
12 m. Digit height of LCD 11 mm. Automatic saving mode after 10 minutes. Switch-off after
2 hours. Upgradeable to interface port with USB or Digimatic, protection remains with cable
connection. Supplied with battery CR 2032, 3 V, in plastic case.
Function:
On and automatic off switch, mm/inch switching, automatic switching by
means of slider movement, key lock set for zero position, re-zeroing after switching
deleted (absolute system), reset (zeroing) possible at each position. Unique extension
for data transmission with TWIN connection (TLC) is possible.
Note:
Replacement battery
(Order No. 4027 2032,
Ç
4/12).
Cable TLC-USB
(Order No. 4025 0015,
Ç
4/12).
Cable TLC-DIGIMATIC
(Order No. 4025 0020,
Ç
4/12).
Transmitter module TLC-TWIN (Order No. 4025 0025,
Ç
4/12).
Receiver TWIN station
available upon request.
Order
No.
Measurement range
mm
4083
Reading
Bridge length
mm
Cross-section of the measuring bar
mm
0251
250
475.00
0.01 mm (0.0005 inch)
150
15 x 4
(495)
Depth gauge calipers TWIN-Cal with rotary stop plate
Design:
Made of stainless steel, hardened, with locking screw, digit height of LCD 7.5 mm,
inductive measurement system, with data output variable RS 232, USB and Digimatic
(DATA Variable). Supplied with plate measuring insert ∅ 7.5 x 1 mm, measuring insert
∅ 4 mm, flat and spherical, battery CR 2032, 3 V, in a wooden box.
Function:
On and automatic off switch, mm/inch switching, automatic switching
by means of slider movement, key lock set for zero position, re-zeroing after
switching deleted (absolute system), reset (zeroing) possible at each position,
± pre-set function (setting a numerical value).
Note:
Replacement battery (Order No. 4027 2032,
Ç
4/12).
Data cable USB
(Order No. 4025 0003,
Ç
4/11).
Data cable Digimatic (Order No. 4025 0004,
Ç
4/11).
Data cable RS 232 available on request.
Order
No.
Measurement range
mm
4084
Reading
Bridge length
mm
Cross-section of the measuring bar
mm
0100
100
509.00
0.01 mm (0.0005 inch)
85
16 x 3
(404)
Digital depth gauge calipers with plate measuring insert
Design:
Made of stainless steel, hardened, measuring faces precision ground and hardened,
with locking screw, digit height of LCD 8 mm, with data output Opto RS 232. Supplied with
battery CR 2032, 3 V, in plastic case.
Function:
On and automatic off switch, mm/inch-conversion, ABS (absolute and relative
measurements), zero setting possible in any position.
Note:
Replacement battery (Order No. 4027 2032,
Ç
4/12).
Data cable
(Order No. 4025 0002,
Ç
4/11).
Order
No.
Measurement
range mm
4097
Reading
Bridge length
mm
Measuring pin ∅
mm
0025
25
66.00
0.01 mm (0.0005 inch)
50
1.5
(435)
Digital depth gauge calipers with measuring pin
DIN
862
INOX
IP 54
opto
RS232
Design:
Made of stainless steel, hardened. Retrofitted for wireless data transfer with transmitter
module TLC TWIN as well as receiver TWIN station. Range between instrument and receiver is
12 m. Digit height of LCD 11 mm. Automatic saving mode after 10 minutes. Switch-off after
2 hours. Upgradeable to interface port with USB or Digimatic, protection remains with cable
connection. Supplied with battery CR 2032, 3 V, in plastic case.
Function:
On and automatic off switch, mm/inch switching, automatic switching by means
of slider movement, key lock set for zero position, re-zeroing after switching deleted (absolute
system), reset (zeroing) possible at each position. Unique extension for data transmission with
TWIN connection (TLC) is possible.
Note:
Replacement battery
(Order No. 4027 2032,
Ç
4/12).
Cable TLC-USB
(Order No. 4025 0015,
Ç
4/12).
Cable TLC-DIGIMATIC
(Order No. 4025 0020,
Ç
4/12).
Transmitter module TLC-TWIN (Order No. 4025 0025,
Ç
4/12).
Receiver TWIN station
available upon request.
Order
No.
Measurement
range mm
4085
Reading
Bridge length
mm
Measuring pin ∅
mm
0002
25
332.00
0.01 mm (0.0005 inch)
50
2
(495)
Digital depth gauge calipers TWIN-Cal with measuring pin
m
m
m
ISO
13385-1
INOX
IP 67
Absolute
function
Certificate
opto
RS232
DIN
862
INOX
Absolute
function
RS232
USB
Digimatic
ISO
13385-1
INOX
IP 67
Absolute
function
Certificate
opto
RS232
Articles marked ◊ are not held in stock, procurement is effected at short notice.
4
Measuring
Equipment
Not all items are available in every country.
753