751 / 1562
4/23
Digital depth gauge calipers
DIN
862
INOX
IP 54
Absolute
function
opto
RS232
Factory
standard
Order
No.
Measurement range
mm
4098
Reading
Bridge length
mm
Cross-section of the measuring bar
mm
0200
200
89.00
0.01 mm (0.0005 inch)
100
12 x 4
0300
300
154.00
0.01 mm (0.0005 inch)
150
12 x 4
0500
500
287.50
0.01 mm (0.0005 inch)
150
12 x 4
(435)
Design:
Made of stainless steel, hardened, measuring faces precision
ground and hardened, with locking screw, digit height of LCD 8 mm,
with data output Opto RS 232. Supplied with battery CR 2032, 3 V,
in plastic case.
Function:
On and automatic off switch, mm/inch-conversion,
ABS (absolute and relative measurements), zero setting possible
in any position.
Note:
Replacement battery (Order No. 4027 2032,
Ç
4/12).
Data cable
(Order No. 4025 0002,
Ç
4/11).
Design:
Made of stainless steel, hardened. Retrofitted for wireless data
transfer with transmitter module TLC TWIN as well as receiver TWIN
station. Range between instrument and receiver is 12 m. Digit height of
LCD 11 mm. Automatic saving mode after 10 minutes. Switch-off after
2 hours. Upgradeable to interface port with USB or Digimatic, protection
remains with cable connection. Supplied with battery CR 2032, 3 V,
in plastic case.
Function:
On and automatic off switch, mm/inch switching, automatic
switching by means of slider movement, key lock set for zero position,
re-zeroing after switching deleted (absolute system), reset (zeroing)
possible at each position. Unique extension for data transmission with
TWIN connection (TLC) is possible.
Note:
Replacement battery
(Order No. 4027 2032,
Ç
4/12).
Cable TLC-USB
(Order No. 4025 0015,
Ç
4/12).
Cable TLC-DIGIMATIC
(Order No. 4025 0020,
Ç
4/12).
Transmitter module TLC-TWIN (Order No. 4025 0025,
Ç
4/12).
Receiver TWIN station
available upon request.
Digital depth gauge calipers TWIN-Cal with straight measuring rod
m
Design:
Made of stainless steel, hardened, measuring faces precision
ground and hardened, with locking screw, digit height of LCD 6 mm,
with data output Opto RS 232. Supplied with battery CR 2032, 3 V,
in plastic case.
Function:
On and automatic off switch, mm/inch-conversion,
ABS (absolute and relative measurements), zero setting possible
in any position.
Note:
Replacement battery (Order No. 4027 2032,
Ç
4/12).
Data cable
(Order No. 4025 0002,
Ç
4/11).
Order
No.
Measurement range
mm
4097
Reading
Bridge length
mm
Cross-section of the measuring bar
mm
0300
300
162.00
0.01 mm (0.0005 inch)
150
12 x 4
(435)
Digital depth gauge calipers with double-sided stepped measuring rod
m
Design:
Supplied with mounting means, in transport packaging
Order
No.
Length
mm
4081
Width
mm
Height
mm
0001
200
215.00
8
10
0003
300
230.00
8
16
0005
400
238.00
8
16
(495)
Mountable measuring bridge
Order
No.
Measurement range
mm
4081
Reading
Bridge length
mm
Cross-section of the measuring bar
mm
0201
200
417.00
0.01 mm (0.0005 inch)
100
15 x 4
0251
250
438.00
0.01 mm (0.0005 inch)
100
15 x 4
0301
300
462.00
0.01 mm (0.0005 inch)
150
15 x 4
0501
500
571.00
0.01 mm (0.0005 inch)
150
15 x 4
(495)
Digital depth gauge calipers with straight measuring rod
m
DIN
862
INOX IP 54
Absolute
function
opto
RS232
ISO
13385-1
INOX IP 67
Absolute
function
Certificate
opto
RS232
Articles marked ◊ are not held in stock, procurement is effected at short notice.
4
Measuring
Equipment
Not all items are available in every country.
751